Overview



This is an optional uplink module for EX4200 switches support SFP, SFP+, or XFP transceivers. The Gigabit Ethernet SFP, SFP+, or XFP transceivers installed in EX4200 switches support digital optical monitoring (DOM).

Use only optical transceivers and optical connectors purchased from Juniper Networks for your EX Series switches.




Specification


Technical Description: Juniper EX-SFP-1GE-SX network transceiver module Fiber optic 1000 Mbit/s 850 nm

Certificates
Certification:
MSA

Certification
Certification:
MSA

Features
Compatible products:Other products that can be used with this product.
Juniper EX4200
Hot-Plug support:Device has hot-plug capability, which means that user can replace system components without shutting down the system.
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes

Operational conditions
Storage relative humidity (H-H):
10 - 85%
Operating relative humidity (H-H):
10 - 80%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C

Performance
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Cabling technology:Type of cable technology performance.
1000BASE-SX
Rx power (max):
0 dBmW
Rx power (min):
-32 dBmW
Tx power (max):
-3 dBmW
Tx power (min):
-9.5 dBmW
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
550 m
SFP transceiver standard:
SX
Fiber cable diameters supported (core/cladding):
50/125,62.5/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Interface type:
SFP
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic


Product details


EX-SFP-1GE-SX Juniper 5052179587061

Juniper EX-SFP-1GE-SX network transceiver module Fiber optic 1000 Mbit/s 850 nm

£56.29 and In stock

SKU: EX-SFP-1GE-SX

Juniper EX-SFP-1GE-SX network transceiver module Fiber optic 1000 Mbit/s 850 nm

Quick Code: Q1599315 MPN: EX-SFP-1GE-SX
£56.29

Quantity:
In Stock
delivery_truck_speedExpected Delivery Tuesday 24th November