Overview



HPE Networking X142 40G QSFP+ LC LR4 SM Transceiver. SFP transceiver type: Fiber optic, Maximum data transfer rate: 40000 Mbit/s, Interface type: QSFP+. Compatible products: HP 5400R zl2. Certification: MSA. Width: 88.9 mm, Depth: 167.6 mm, Height: 22.9 mm. Quantity per pack: 1 pc(s)




Specification


Technical Description: HPE X142 40G QSFP+ LC LR4 SM network transceiver module Fiber optic 40000 Mbit/s QSFP+ 1310 nm

Certificates
Certification:
MSA

Certification
Certification:
MSA

Features
Compatible products:Other products that can be used with this product.
HP 5400R zl2
Hot-Plug support:Device has hot-plug capability, which means that user can replace system components without shutting down the system.
Yes

Logistics data
Harmonized System (HS) code:
85369010

Operational conditions
Storage relative humidity (H-H):
10 - 85%
Operating relative humidity (H-H):
10 - 80%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Performance
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Cabling technology:Type of cable technology performance.
40GBASE-LR4
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
SFP transceiver standard:
LR4
Fiber cable diameters supported (core/cladding):
9/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
QSFP+
Maximum data transfer rate:
40000 Mbit/s
SFP transceiver type:
Fiber optic

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
90 g
Height:The measurement of the product from head to foot or from base to top.
22.9 mm
Depth:The distance from the front to the back of something.
167.6 mm
Width:The measurement or extent of something from side to side.
88.9 mm


Product details


JH232A HPE 0889296046318

HPE X142 40G QSFP+ LC LR4 SM network transceiver module Fiber optic 40000 Mbit/s QSFP+ 1310 nm

£1942.99 and In stock

SKU: JH232A

HPE X142 40G QSFP+ LC LR4 SM network transceiver module Fiber optic 40000 Mbit/s QSFP+ 1310 nm

Quick Code: Q3133593 MPN: JH232A
£1942.99

Quantity:
In Stock
delivery_truck_speedExpected Delivery Tuesday 24th November