Main product

Overview


The Cisco® Catalyst® 3560 v2 Series is the next-generation energy-efficient Layer 3 fast Ethernet switches. This new series of switches supports Cisco EnergyWise technology, which enables companies to measure and manage power consumption of network infrastructure and network-attached devices, thereby reducing their energy costs and their carbon footprint. The Cisco Catalyst 3560 v2 Series consumes less power than its predecessors and is the ideal access layer switch for enterprise, retail, and branch-office environments, as it maximizes productivity and investment protection by enabling a unified network for data, voice, and video.

Cisco Catalyst 3560 v2 Series Highlights
-Lower power consumption than its predecessors.
-Backward compatible - uses the same Cisco IOS® Software image as the 3560 series and has the same feature set.
-Full EnergyWise support to monitor energy consumption of network infrastructure and implement energy saving programs to reduce energy costs.
-Compatible with Cisco Redundant Power System (RPS) 2300.
-All units have a uniform depth of 11.9 inches for better cable management.
-Preconfigurable with the Cisco IOS Software release at the time of ordering.
-IPv6 routing included in the IP Services feature set.
-DC powered stand-alone model.

Cisco Catalyst 3560 v2 Series Software
The Cisco Catalyst 3560 v2 Series can be purchased with the IP Base or IP Services licenses preinstalled. The IP Base license offers advanced QoS, rate limiting, ACLs, and basic static and Routing Information Protocol (RIP) routing functions. The IP Services license provides a richer set of enterprise-class features, including advanced hardware-based IP unicast and IP Multicast routing as well as policy-based routing (PBR). The Advanced IP Services license, which includes IPv6 routing and IPv6 ACL support, is now included in the IP Services license. Upgrade licenses are available to upgrade a switch from the IP Base license to the IP Services license.

Configurable Cisco IOS Software
The Cisco Catalyst 3560 v2 Series can be preconfigured with a specific Cisco IOS Software release at the time of ordering. This option eliminates the need to reload a specific Cisco IOS Software release during deployment, thereby reducing deployment time and cost. The Cisco IOS Software release to be preloaded can be selected from a list of supported Cisco IOS Software releases, including the crypto version.

Cisco EnergyWise
The Cisco Catalyst 3560 v2 series support Cisco EnergyWise, which is a technology that enables monitoring, reporting, and management of energy consumption by end devices that are Cisco EnergyWise enabled. This technology enables companies to reduce their energy cost and carbon footprint. These are some of the EnergyWise features available:

-Discover all Cisco EnergyWise enabled devices on the network.
-Monitor and report power consumption by these devices.
-Implement business rules to control power to these end devices.

Power over Ethernet
The Cisco Catalyst 3560 v2 Series can provide a lower total cost of ownership (TCO) for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3af-compliant end device. PoE eliminates the need for wall power outlets for each PoE-enabled device and significantly reduces the cost for additional electrical cabling that would otherwise be necessary in IP phone and WLAN deployments. The Cisco Catalyst 3560 v2 24-port PoE switch can support Class 3 PoE or 15.4W of PoE power on all 24 ports. Taking advantage of Cisco Catalyst Intelligent Power Management, the Cisco Catalyst 3560 v2 48-port PoE configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between. Maximum power availability for a converged voice and data network is attainable when a Cisco Catalyst 3560 v2 series switch is combined with the Cisco Redundant Power System 2300 (RPS 2300) for protection against internal power supply failures and an uninterruptible power supply (UPS) system to safeguard against power outages.

Redundant Power System
The Cisco Catalyst 3560 v2 Series access switches support the new generation of Cisco RPS 2300, which increases availability in a converged data, voice, and video network by providing transparent power backup to two of six attached Cisco Catalyst 3560 v2 Series Switches at the same time. The Cisco Catalyst 3560 v2 Series switches are capable of reverting back to their internal power supply without any service interruption. In addition, the RPS 2300 can be managed via a Cisco Catalyst 3560 v2 Series switch that is connected to the RPS 2300.




Specification

Technical Description: Cisco 48 Ethernet 10/100 ports + PoE & 4 SFP Gigabit Ethernet ports Managed Power over Ethernet (PoE)
Data transmission
Jumbo frames support:
Yes
Maximum data transfer rate:
1 Gbit/s
Supported data transfer rates:Rates at which data can be transferred. May vary according to network configurations.
10/100/1000 Mbps

Design
Safety:List of regulatory safety standards for all countries in which this product has been certified.
UL 60950-1, CUL to CAN/CSA 22.2 No. 60950-1, TUV/GS to EN 60950-1, CB to IEC 60950-1, NOM, CE Marking
Stackable:Devices can be placed on top of each other.
No

Management features
Quality of Service (QoS) support:
Yes
Switch type:What switch device has, managed or unmanaged.
Managed

Multicast features
Multicast support:
Yes

Network
Number of VLANs:
1000
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Broadcast storm control:
Yes
Link aggregation:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
IP routing:
Yes
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x

Networking
Number of VLANs:
1000
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Broadcast storm control:
Yes
Link aggregation:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
IP routing:
Yes
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x

Operational conditions
Heat dissipation:The heat generated by the power supply.
1548 BTU/h
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
32 - 113 °F
Non-operating altitude:
0 - 4573 m
Operating altitude:
0 - 3000 m
Storage relative humidity (H-H):
10 - 85%
Operating relative humidity (H-H):
10 - 85%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-25 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 45 °C

Other features
Acoustic pressure emissions:Level of sound pressure per ISO 9614-1.
5.5 dB
Connectivity LEDs:
Yes
Dimensions (W x D x H) (imperial):
443.5 x 295.1 x 43.9 mm (17.5 x 11.6 x 1.73")
Electromagnetic emissions:
FCC P 15 Class A, EN 55022 Class A (CISPR22), EN 55024 (CISPR24), AS/NZS CISPR22 Class A, CE, KCC, GOST
Weight (imperial):
4.99 kg (11 lbs)
Input frequency:The frequency (Hz) which is required to power the product.
50/60 Hz
Networking features:
Ethernet, Fast Ethernet, Gigabit Ethernet
Bandwidth:Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
8 Gbit/s
Connectivity technology:
Wired
Dimensions (WxDxH):Dimensions of the product (Width x Depth x Height).
443 x 295 x 44 mm

Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
275360 h
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
45 dB
Flash memory:
32 MB

Ports & interfaces
SFP module slots quantity:
4
SFP/SFP+ slots quantity:
4
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
48

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
452 W
Input voltage:The voltage (V) which is required to power the product.
100 - 240 V
Input current:
2 - 5 A
Redundant power supply (RPS) support:Additional power supply which can run a computer if the main power supply fails.
Yes

Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Protocols
Management protocols:
SNMP, SNMPv2, SNMPv3, RMON, Telnet, DNS, TACACS+, RADIUS

Security
MAC address filtering:Security access control method whereby the 48-bit address assigned to each network card is used to determine access to the network. MAC addresses are uniquely assigned to each card, so using MAC filtering on a network permits and denies network access to specific devices through the use of blacklists and whitelists.
Yes
SSH/SSL support:
Yes
IGMP snooping:
Yes
Access Control List (ACL):
Yes
DHCP features:
DHCP server

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
5 kg

Product details

WS-C3560V2-48PS-S Cisco 0882658269172

Cisco 48 Ethernet 10/100 ports + PoE & 4 SFP Gigabit Ethernet ports Managed Power over Ethernet (PoE)

£64.00 and In stock

SKU: WS-C3560V2-48PS-S

Cisco 48 Ethernet 10/100 ports + PoE & 4 SFP Gigabit Ethernet ports Managed Power over Ethernet (PoE)

Quick Code: Q3076205 MPN: WS-C3560V2-48PS-S
£64.00

In Stock