Main product

Overview



TL-SG1210PP is an unmanaged switch with 10 Gigabit ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

Power Over Ethernet
8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8.

Overload Arrangement
TL-SG1210PP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is = 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Intelligent Power Management
Priority (port 1 > port 2 ……> port 8): This function will help protect the system when the system power is overloaded. For example, port 3, 4, 5 and 6 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 1 with 35 W, and then the system will cut off the power of port 6 because of the overloaded power, this means port 3, 4 and 5 will use 25 W respectively and port 1 will use 35 W, no power will be supplied to port 6.

Highlight Performance
• Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-4.
• Priority Mode ensures high priority of ports 1–2 to guarantee the quality of the sensitive applications
• Isolation Mode allows one-click client traffic separation for higher security and performance
• With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-8. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.

TL-SG1210PP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 10-Port Gigabit Desktop Switch with 8-Port PoE+ and 2-Port PoE++ TL-SG1210PP is a great selection for expanding your network.




At-a-glance


  • 802.1p/DSCP QoS enable smooth latency-sensitive traffic

  • 9× 10/100/1000Mbps RJ45 Ports, 1× 1000Mbps Combo SFP/RJ45 Port

  • Isolation Mode allows one-click client traffic separation for higher security and performance

  • Plug and Play, no configuration and installation required

  • PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices

  • Priority Mode guarantees the quality of sensitive applications like video monitoring in critical business areas by prioritizing the data of ports 1-2

  • Supports PoE Power up to 123 W for all PoE ports*

  • Supports PoE Power up to 30 W for each PoE+ port and 60 W for PoE++ port

  • Up to 250m data and power transmitting range under Extend Mode**

  • With 2× PoE++ ports and 6× PoE+ ports, transfers data and power on one single cable

  • Works with IEEE 802.3af/at/bt compliant PDs




Reasons to buy

  • 802.1p/DSCP QoS enable smooth latency-sensitive traffic
  • 9× 10/100/1000Mbps RJ45 Ports, 1× 1000Mbps Combo SFP/RJ45 Port
  • Isolation Mode allows one-click client traffic separation for higher security and performance
  • Plug and Play, no configuration and installation required
  • PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
  • Priority Mode guarantees the quality of sensitive applications like video monitoring in critical business areas by prioritizing the data of ports 1-2
  • Supports PoE Power up to 123 W for all PoE ports*
  • Supports PoE Power up to 30 W for each PoE+ port and 60 W for PoE++ port
  • Up to 250m data and power transmitting range under Extend Mode**
  • With 2× PoE++ ports and 6× PoE+ ports, transfers data and power on one single cable
  • Works with IEEE 802.3af/at/bt compliant PDs

Specification

Technical Description: TP-Link 10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++
Certificates
Certification:
FCC, CE, RoHS

Certification
Certification:
FCC, CE, RoHS

Data transmission
Store-and-forward:
Yes
Forwarding rate:
14.88 Mpps
Switching capacity:The data transfer capacity of the switch per second.
20 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
4000 entries

Design
LED indicators:
Yes
Housing material:
Steel
Product colour:
Black
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
No

General
Type:Characteristics of the device.
Network Switches

Logistics data
Harmonized System (HS) code:
85176990

Management features
Quality of Service (QoS) support:
Yes
Switch type:What switch device has, managed or unmanaged.
Unmanaged

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Operational conditions
Heat dissipation:The heat generated by the power supply.
482.17 BTU/h
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C

Packaging content
User guide:
Yes
Cables included:
AC

Packaging data
Package type:The type of product package e.g. box.
Box

Performance
Fanless:
Yes

Ports & interfaces
Combo SFP ports quantity:
1
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Gigabit Ethernet (copper) ports quantity:
10
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
10

Power
Power consumption (max):The maximum amount of power used by the device.
144.1 W
Input voltage:The voltage (V) which is required to power the product.
53.5 V
Input current:
2.43 A
AC input frequency:
50 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
90 - 220 V
Number of power supply units:
1
Power supply included:There is a power supply with this product.
Yes
Power source:What is providing power for the product e.g. mains electricity.
DC/PoE

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget:
123 W
Power over Ethernet 4PPoE (PoE++) ports quantity:
6
Power over Ethernet plus (PoE+) ports quantity:
2
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Security
IGMP snooping:
Yes

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
26 mm
Depth:The distance from the front to the back of something.
126 mm
Width:The measurement or extent of something from side to side.
209 mm

Product details

TL-SG1210PP TP-LINK 4895252500356

TP-Link 10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++

£143.99 and In stock

SKU: TL-SG1210PP

TP-Link 10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++

Quick Code: Q813817 MPN: TL-SG1210PP
£143.99

Quantity:
In Stock

Key Features

  • Works with IEEE 802.3af/at/bt compliant PDs
  • Supports PoE Power up to 123 W for all PoE ports*