Main product

Overview


What This Product Does
The TL-SG1008MP is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the IEEE 802.3af/at, PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 126W, up to 30W per port, TL-SG1008MP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008MP can save up to 75% of the power consumption, making it an eco-friendly solution for your business network.

How This Product Works
All 8 ports of TL-SG1008MP support Power over Ethernet (IEEE 802.3af/at, PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). The electrical power is transmitted along with data in a single cable, allowing you to expand your network where there is no electrical outlet, and feed the devices such as wireless APs, cameras, and phones.

Prioritized Power Supply
Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port 7 > port 8): This function helps protect the system if the power becomes overloaded. For example, if port 1, 2, 4 and 7 are using 30W (maximum power per port is 30W, the system power is 120W in total), and there is an additional device inserted into Port 3 at 25W, the system will cut off the power on Port 7 to protect the switch being overload. This means Port 1, 2 and 4 will use 30W, and Port 3 will use 25W, with no power will be supplied on Port 7 as it has the lowest priority among the ports in use.

Easy To Use
TL-SG1008MP is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-Link TL-SG1008MP 8-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE is a great choice for expanding your home or office network.




At-a-glance


  • 8 10/100/1000Mbps RJ45 ports

  • Equipped with 8 PoE+ ports to power 8 PoE devices at the same time

  • Innovative energy-efficient technology reduces power consumption

  • Plug and play design, no configuration required

  • Rack mountable with included rack mount bracket

  • Total PoE power budget up to 126W

  • Works with IEEE 802.3af or 802.3at compliant up to 30W per port device




Reasons to buy

  • 8 10/100/1000Mbps RJ45 ports
  • Equipped with 8 PoE+ ports to power 8 PoE devices at the same time
  • Innovative energy-efficient technology reduces power consumption
  • Plug and play design, no configuration required
  • Rack mountable with included rack mount bracket
  • Total PoE power budget up to 126W
  • Works with IEEE 802.3af or 802.3at compliant up to 30W per port device

Specification

Technical Description: TP-Link TL-SG1008MP Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Black
Certificates
Compliance certificates:
CE, Federal Communications Commission (FCC), RoHS

Certification
Compliance certificates:
CE, Federal Communications Commission (FCC), RoHS

Data transmission
Packet buffer memory:
1.5 MB
Jumbo frames:
16000
Jumbo frames support:
Yes
Store-and-forward:
Yes
Forwarding rate:
11.904 Mpps
Switching capacity:The data transfer capacity of the switch per second.
16 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
4000 entries

Design
Number of fans:The quantity of fans (apparatus with rotating blades that creates a current of air for cooling or ventilation).
1 fan(s)
LED indicators:
Yes
Housing material:
Metal
Product colour:
Black
Form factor:The shape or design of the product.
1U
Stackable:Devices can be placed on top of each other.
No
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
Yes

General
Type:Characteristics of the device.
Network Switches

Logistics data
Harmonized System (HS) code:
85176990

Management features
Switch type:What switch device has, managed or unmanaged.
Unmanaged

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x

Operational conditions
Heat dissipation:The heat generated by the power supply.
592.15 BTU/h
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C

Packaging content
Rack mount kit:
Yes
User guide:
Yes
Cables included:
AC

Packaging data
Package weight:Weight of the packaged product.
2.11 kg
Package height:The distance from the top to the bottom of the packaging.
80 mm
Package depth:The distance from the front to the back of the packaging.
400 mm
Package width:The distance from one side of the packaging to the other.
250 mm
Package type:The type of product package e.g. box.
Box

Performance
Maximum cable length:
100 m

Ports & interfaces
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Gigabit Ethernet (copper) ports quantity:
8
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
8

Power
Power consumption (max):The maximum amount of power used by the device.
173.65 W
AC input frequency:
50/60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power supply included:There is a power supply with this product.
Yes
Power source:What is providing power for the product e.g. mains electricity.
AC/PoE

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget:
153 W
Power over Ethernet plus (PoE+) ports quantity:
8
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Sustainability
Sustainability compliance:
Yes

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
44 mm
Depth:The distance from the front to the back of something.
180 mm
Width:The measurement or extent of something from side to side.
294 mm

Product details

TL-SG1008MP TP-LINK 6935364085254

TP-Link TL-SG1008MP Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Black

£113.99 and In stock

SKU: TL-SG1008MP

TP-Link TL-SG1008MP Unmanaged Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Black

Quick Code: Q368022 MPN: TL-SG1008MP
£113.99

Quantity:
In Stock

Key Features

  • 8 10/100/1000Mbps RJ45 ports
  • Rack mountable with included rack mount bracket
  • Total PoE power budget up to 126W
  • Plug and play design, no configuration required