Main product

Overview


Integrated PSE & PD,No power adapter required
5-Port Gigabit PD Switch With 4-Port PoE

5 Gigabit Ports, Integrated PSE & PD Design
The 5 ports of TEG1105PD are all gigabit ports, with 4 PoE OUT ports (ports 1 to 4) and 1 PoE IN port (port 5). The switch can be powered by the IEEE 802.3af/at compliant PSE through port 5 with an Ethernet cable, and supply power to such PDs as low-power APs and IP cameras through ports 1 to 4.

Gigabit speed without reduction within 200m, Stable transmission without dropping
As a relay, the switch can extend the data transmission distance to 325 meters at most and offer long-distance PoE power supply through multiple PoE ports. Suitable for medium and long-distance wired monitoring scenarios or low-power wireless coverage scenarios such as enterprise parks, factories, schools, etc.

Cut costs,Practical & Stable,Your Better Choice
TEG1105PD does not require independent power supply, just plug and play, no need to consider the power supply during the network deployment; in addition, there is no need to pull out multiple network cables from the PoE switch (PSE) in the data equipment room to supply power to multiple PoE powered devices (PD). Therefore, the network deployment cost can be greatly saved while ensuring the quality of the project.

325m long-distance PoE relay, No power adapter required, Easy to get power supply, Suitable & Practical for your networking.

6KV lightning protection, Stable operation in thunderstorm environment
This switch provides short circuit protection for PSE and 6 kV lightning protection for all ports, protecting the switch itself to operate steadily from surge and lightning damages in thunderstorms.

Small & Delicate,Easy to be installed in the weak electric/waterproof box
TEG1105PD has a compact shell, about the size of two splicing bank cards, and can be easily installed in a weak electric box or an outdoor waterproof box. All-steel shell, sturdy and durable.

Quiet & Heat dissipation
Steel Shell, Fanless Design, Low Power Consumption

Safer
Network Construction Without Strong Electricity

Stable Operation
Few failure points, easy maintenance




At-a-glance


  • Five 10/100/1000 Mbps auto-negotiation ports

  • Full-duplex flow control and half-duplex back pressure control prevent frame loss caused by port blocking

  • Port 5 supports power supply by a PSE compliant with IEEE 802.3af/at

  • Ports 1 - 4 support power supply to low-power PDs compliant with IEEE 802.3af

  • The non-blocking wire-speed forwarding function guarantees the smooth operation of network applications

  • The switch supports 9K jumbo frame, improving the forwarding rate of large files

  • The switch supports auto MDI/MDIX, simplifing the network structure and maintenance

  • The switch supports IP camera connection and guarantees the smoothness and clearness of monitoring videos

  • The switch supports the store-and-forward transfer mode and a 2 K MAC address table




Reasons to buy

  • Five 10/100/1000 Mbps auto-negotiation ports
  • Full-duplex flow control and half-duplex back pressure control prevent frame loss caused by port blocking
  • Port 5 supports power supply by a PSE compliant with IEEE 802.3af/at
  • Ports 1 - 4 support power supply to low-power PDs compliant with IEEE 802.3af
  • The non-blocking wire-speed forwarding function guarantees the smooth operation of network applications
  • The switch supports 9K jumbo frame, improving the forwarding rate of large files
  • The switch supports auto MDI/MDIX, simplifing the network structure and maintenance
  • The switch supports IP camera connection and guarantees the smoothness and clearness of monitoring videos
  • The switch supports the store-and-forward transfer mode and a 2 K MAC address table

Specification

Technical Description:

Certificates
Certification:
CQC, FCC, CE, RoHS

Certification
Certification:
CQC, FCC, CE, RoHS

Data transmission
Packet buffer memory:
1 MB
Packet forwarding rate (1 Gbps):
14880 pps
Packet forwarding rate (10 Mbps):
1488000 pps
Packet forwarding rate (100 Mbps):
148800 pps
Jumbo frames:
9000
Jumbo frames support:
Yes
Switching capacity:The data transfer capacity of the switch per second.
10 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
2000 entries

Design
LED indicators:
Link, PoE, Power
Housing material:
Metal
Product colour:
Brown

Network
MAC address auto-learning supported:
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-T, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x

Networking
MAC address auto-learning supported:
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-T, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x

Operational conditions
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 45 °C

Ports & interfaces
Power connector:
DC-in jack
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
5

Power
Input current:
0.6 A
DC input voltage:
50 - 57 V
Power supply included:There is a power supply with this product.
Yes

Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity:
4
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
26 mm
Depth:The distance from the front to the back of something.
100 mm
Width:The measurement or extent of something from side to side.
100 mm

Product details

TEG1105PD Tenda

£0.00 and

SKU: TEG1105PD

Quick Code: Q MPN: TEG1105PD
£0.00

Out of Stock