Seagate 320GB 7.2K 6G 3.5INCH SATA HDD

Refurbished

Quick Code: Q1629765 MPN: ST320DM000-RFB
£52.99

In Stock

Overview



These drives provide the following key features:
- 7200 RPM spindle speed;
- Seagate SmartAlign technology provides a simple, transparent migration to Advanced Format 4K sectors;
- High instantaneous (burst) data-transfer rates (up to 600MB per second);
- Perpendicular recording technology provides the drives with increased areal density;
- State-of-the-art cache and on-the-fly error-correction algorithms;
- Native Command Queueing with command ordering to increase performance in demanding applications;
- Full-track multiple-sector transfer capability without local processor intervention;
- Quiet operation;
- Compliant with RoHS requirements in China and Europe;
- SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns;
- Support for S.M.A.R.T. drive monitoring and reporting;
- Supports latching SATA cables and connectors;
- Worldwide Name (WWN) capability uniquely identifies the drive.




Specification


Technical Description: Seagate 320GB 7.2K 6G 3.5INCH SATA HDD

Features
Start/stop cycles:
50000
Bytes per sector:
4096
Average latency:The average duration before a device can start with a job (for example reading a file from a hard disk).
4.16 ms
Track to track seek time:
1.2 ms
Read seek time:
8.5 ms
Write seek time:
9.5 ms
HDD number of heads:
2
Storage drive buffer size:
16 MB
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Serial ATA
HDD size:
3.5"
HDD speed:
7200 RPM
HDD capacity:
320 GB

Operational conditions
Non-operating shock:Environmental requirements for optimal protection from impact in non-operating mode
350 G
Operating shock:Environmental requirements for optimal protection from impact in operating mode
70 G
Non-operating altitude:
-304.8 - 12192 m
Operating altitude:
-304.8 - 3048 m
Non-operating vibration:Environmental requirements for vibration in non-operating mode
3 G
Operating vibration:Environmental requirements for vibration in operating mode
0.5 G
Storage relative humidity (H-H):
5 - 95%
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 60 °C

Other features
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
4.69 Gbit/s
Disks included quantity:
1 pc(s)
Drive ready time:
8.5 s
Internal:The product is built in.
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Recording density:The density of written data
1413 kbit/inch
Track density:
236 kt/in

Power
Start-up current:
2 A
Operating voltage:Defines the range of operating voltages available
5 / 12 V

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
415 g
Depth:The distance from the front to the back of something.
147 mm
Height:The measurement of the product from head to foot or from base to top.
20 mm
Width:The measurement or extent of something from side to side.
101.6 mm


Product details


ST320DM000-RFB Seagate

Seagate 320GB 7.2K 6G 3.5INCH SATA HDD

£52.99 and In stock

SKUST320DM000-RFB


Parent Product

ST320DM000 Seagate


MPN: ST320DM000