Overview



Looking for seriously simple and affordable flash storage?

The HPE MSA 2062 Storage is a flash-enabled system designed for affordable application acceleration for small and remote office deployments. Don’t let the low cost fool you. The HPE MSA 2062 gives you the combination of simplicity, flexibility and advanced features you many not expect in an entry-priced storage array. Starting with 3.84 TB of embedded flash capacity, you can scale the system from there with any combination of solid state disks (SSD), high-performance Enterprise SAS HDDs, or lower-cost Midline SAS HDDs. Capable of delivering in excess of 325,000 IOPS, the HPE MSA 2062 saves you up to 32% with an all-inclusive software suite and 3.84 TB of flash capacity included. It’s seriously simple and affordable flash storage to help you achieve high performance yet meet challenging budgets.



Affordable Application Acceleration
- The HPE MSA 2062 Storage is capable of delivering over 325,000 IOPS for affordable application acceleration for small to medium-sized businesses.
- Save 32% on HPE MSA 2062 with all-inclusive software and 3.84 TB of Solid State Drive (SSD) capacity included.

MSA’s 'set and forget' Data Services does not Require a Dedicated Storage Administrator to Manage
- The HPE MSA 2060 Storage is easy to install, easy to use, easy to maintain, even for an IT generalist. Administrators will find the MSA 2060’s new Storage Management Utility intuitive and easy to navigate.
- MSA’s automated tiering engine dynamically responds to workload changes so you don’t have to, insuring the hottest data will be moved to the fastest media automatically and in real-time.

Leverage Data Protection to Keep your Business Running in the Event of a Disaster
- The HPE MSA 2060 Storage delivers virtualized snapshot technology making data protection and instant recovery a snap.
- Remote replication via Fibre Channel (FC) or iSCSI facilitates affordable disaster recovery solution.
- Encrypted SSDs and HDDs with local key management can be deployed to deliver a secure, encrypted hybrid flash array.

Flexible, Modular Architecture that Facilitates Growth into the Future
- The HPE MSA 2060 Storage supports a mixture of 3.5 inch LFF and 2.5 inch SFFCloseSmall Form Factor expansion enclosures for a maximum of 9 (10 including base system) enclosures.
- Start small and scale as needed with any combination of SSDs, Enterprise SAS or MidLine SAS HDDs.




Specification


Technical Description: HP E MSA 2062 10GBE ISCSI 24SFF STORAGE 2*CTRL 2*PSU NO E-LTU/SSD

Design
Chassis type:The type of rigid framework onto which is the hosuing for device components.
Rack (2U)
Device class:The category to which this device belongs.
Small & Medium Business

Logistics data
Harmonized System (HS) code:
84717020

Other features
SAN backup support:
Yes
Storage mirroring:
Yes
Controller interface type:
iSCSI

Performance
Maximum number of controllers supported:
2

Ports & interfaces
Host ports:
8
USB connectivity:The product has USB connector.
No

Power
AC input frequency:
50 - 60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 230 V
Redundant power supply (RPS) support:Additional power supply which can run a computer if the main power supply fails.
Yes
Number of power supply units:
2

Storage
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
10 Gbit/s
RAID levels:RAID is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
0, 1, 5, 6, 10
Storage drive size:
2.5"
Storage drive capacity:The amount of data that can be stored on the storage drive.
1.92 TB
Maximum supported storage capacity:
921 TB
Number of storage drives supported:
24
Supported storage drive types:
HDD & SSD
Total installed storage capacity:
3.84 TB
Number of storage drives installed:Amount of storage drives built into the device.
2
Installed storage drive type:Type of storage drives built into the device e.g. HDD (hard disk drive), SSD (solid-state drive).
SSD
Storage drives installed:Storage drives are built into the system.
Yes

System requirements
Linux operating systems supported:8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)
Yes
Other operating systems supported:
Yes
Server operating systems supported:
Windows Server 2016, Windows Server 2019

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
5 kg
Height:The measurement of the product from head to foot or from base to top.
89 mm
Depth:The distance from the front to the back of something.
508 mm
Width:The measurement or extent of something from side to side.
445 mm


Product details


R0Q82A-RFB HP

HP E MSA 2062 10GBE ISCSI 24SFF STORAGE 2*CTRL 2*PSU NO E-LTU/SSD

£6248.99 and

SKUR0Q82A-RFB


Parent Product

R0Q82A HP


MPN: R0Q82A

HP E MSA 2062 10GBE ISCSI 24SFF STORAGE 2*CTRL 2*PSU NO E-LTU/SSD

Refurbished

Quick Code: Q1667480 MPN: R0Q82A-RFB
£6248.99

Out of Stock