HPE MSA 1050 disk array 0 TB Rack (2U) Black

Quick Code: Q1875741 MPN: Q2R25A
£4246.99

Out of Stock

Overview


Need a modern shared storage array which is flash-ready when you are and affordable with what’s left of a small budget? The HPE MSA 1050 SAN Storage brings affordable flash storage down to the most price sensitive customers. Designed to meet entry-level storage requirements, the HPE MSA 1050 SAN Storage is a good fit for budget constrained customers. With one of the lowest entry price point in the Hewlett Packard Enterprise Storage portfolio and field-proven HPE ProLiant compatibility, the HPE MSA 1050 SAN Storage is the platform of choice for smaller IT workloads. The HPE MSA 1050 SAN Storage features iSCSI, FC and SAS host interface connectivity at previously unattainable entry price points. This storage allows users to take advantage of the latest storage technologies while also providing a balance between performance and budget. This portfolio has been the industry-leading entry storage FC platform1 for the past eight years, with nearly 500,000 storage systems sold worldwide.

What's new
- Introducing new and higher capacity small form factor (SFF) and large form factor (LFF) drives.
- HPE MSA 2.4TB 12G SAS 10K SFFCloseSmall Form Factor (2.5in) Enterprise 512e with a 3yr warranty hard drive; and HPE MSA 12TB 12G SAS 7.2K LFF (3.5in) Midline 512e with a 1yr warranty hard drive.



Affordable, Flash-ready Storage
- The HPE MSA 1050 SAN Storage base unit comes factory-configured with dual-controller arrays, four host ports delivering 8 Gb Fibre Channel, 1GbE iSCSI, 10GbE iSCSI or 12 Gb SAS.
- Moving to a modern flash-ready array delivers performance enhancement and decreased latencies. Advanced data services and a small investment in flash can take your organization to the next level.

Simple, Proven HPE ProLiant Gen10 Compatible Shared Storage
- The HPE MSA 1050 SAN Storage continues its heritage of providing affordable, easy to use shared storage without a big learning curve with its intuitive setup and management for HPE ProLiant administrators.
- Matching industrial design to fit right in with your HPE ProLiant Gen10 Servers.

Advanced Virtualization Services with a Simplified Licensing Approach
- The HPE MSA 1050 SAN Storage leverages flash with easy to use, easy to maintain tiering and read cache technologies.
- No storage expertise necessary; this system dynamically responds to workload changes so you don’t have to.

Expandable and Upgradable to Meet New Demands
- With the HPE MSA 1050 SAN Storage, you can add additional hard disk drives (HDDs) or disk expansions to your HPE MSA 1050 SAN Storage or upgrade to the HPE MSA 2050 SAN Storage through data-in-place upgrades; a simple 15 minute upgrade.
- No migrations required making it a lot easier to install and manage.




Specification

Technical Description: HPE MSA 1050 disk array 0 TB Rack (2U) Black
Design
Supported network protocols:Network protocols tested as compatible with this product e.g. FTP,HTML, POP.
iSCSI
Product colour:
Black
Internal:The product is built in.
Yes
Chassis type:The type of rigid framework onto which is the hosuing for device components.
Rack (2U)
Device class:The category to which this device belongs.
Small & Medium Business

Other features
Compliance certificates:
RoHS

Ports & interfaces
Host ports:
4
USB connectivity:The product has USB connector.
No

Storage
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
10 Gbit/s
RAID levels:RAID is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
1, 5, 6, 10
Storage drive sizes supported:The sizes of storage drives that can be used with the product.
2.5"
Supported storage drive interfaces:
SAS
Maximum supported storage capacity:
307 TB
Number of storage drives supported:
96
Supported storage drive types:
HDD & SSD
Total installed storage capacity:
0 TB
Number of storage drives installed:Amount of storage drives built into the device.
0
Installed storage drive type:Type of storage drives built into the device e.g. HDD (hard disk drive), SSD (solid-state drive).
No
Storage drives installed:Storage drives are built into the system.
No

System requirements
Linux operating systems supported:8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)
Yes
Server operating systems supported:
Windows Server 2012, Windows Server 2016

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
17.6 kg
Height:The measurement of the product from head to foot or from base to top.
89 mm
Depth:The distance from the front to the back of something.
447 mm
Width:The measurement or extent of something from side to side.
495 mm

Product details

Q2R25A HP

HPE MSA 1050 disk array 0 TB Rack (2U) Black

£4246.99 and

SKU: Q2R25A