Design
Placement:Where the product can be placed e.g. floor, wall.
Ceiling, Floor
Product type:The sub-category of the product.
Standard throw projector
Display
Built-in display:A display which is part of the product, so you do not need to attach another display.
Features
Noise level (economic mode):
28 dB
Noise level:The amplitude level of the undesired background noise, usually measured in decibels (db).
35 dB
General
Type:Characteristics of the device.
Data Projectors
Lens system
Vertical lens shift range:
-48 - 71%
Horizontal lens shift range:
-27 - 34%
Throw ratio:
1.46 - 2.93:1
Zoom ratio:Measures how much the camera can adjust its focus for distance shots. A 3x zoom ratio changes the camera's focal length by a factor of three, from 35 mm to 105 mm for example.
2.0:1
Zoom capability:The amount that the camera lens can zoom.
Aperture range (F-F):Aperture range of the device's optics, expressed in f-stops.
2 - 3.4
Focal length range:
21.5 - 43 mm
Light source
Service life of light source (economic mode):
24000 h
Service life of light source:
20000 h
Network
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
2
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Networking
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
2
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Operational conditions
Operating relative humidity (H-H):
10 - 80%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 45 °C
Packaging content
Ports & interfaces
PC in (D-Sub):The socket (port) to receive input from a PC via a D-sub, which is a connector with a characteristic D-shaped metal shield.
Serial interface type:
RS-232C
USB 2.0 ports quantity:Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.
1
HDMI ports quantity:The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
2
VGA (D-Sub) ports quantity:Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.
2
Power
AC input frequency:
50/60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power consumption (economy mode):
310 W
Power consumption (max):The maximum amount of power used by the device.
480 W
Power consumption (standby):The amount of electricity that is consumed when the product is on standby.
0.5 W
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
390 W
Power source:What is providing power for the product e.g. mains electricity.
AC
Projector
Heat dissipation:The heat generated by the power supply.
1640 BTU/h
Keystone correction, horizontal:
-20 - 20°
Keystone correction, vertical:
-40 - 40°
Matrix size:
1.65 cm (0.65")
Uniformity:Defines in percentage the harmonious spread of the projection
90%
Screen size compatibility:The different screen sizes which the device can work with.
1016 - 7620 mm (40 - 300")
Native aspect ratio:The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.
16:9
Contrast ratio (typical):The difference in light intensity between the brightest white and the darkest black.
20000:1
Projector native resolution:
UHD 4K (3840x2160)
Projection technology:
DLP
Projector brightness:
5200 ANSI lumens
Video
Full HD:Full High Definition (HD) means that a display supports a resolution of 1920 x 1080 pixel, and has a digital TV connection.
Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
168 mm
Depth:The distance from the front to the back of something.
492 mm
Width:The measurement or extent of something from side to side.
498 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
16.1 kg
