Kingston Technology ValueRAM KVR26S19S6/4 memory module 4 GB 1 x 4 GB DDR4 2666 MHz

Quick Code: Q203758 MPN: KVR26S19S6/4
£37.00

Out of Stock

Key Features

  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 8 internal banks; 2 groups of 4 banks each
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.18” (30.00mm)
  • RoHS Compliant and Halogen-Free

Overview


This document describes ValueRAM's KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.




At-a-glance


  • 8 internal banks; 2 groups of 4 banks each

  • Data bus inversion (DBI) for data bus

  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

  • Fly-by topology

  • Low-power auto self refresh (LPASR)

  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

  • On-board I2 serial presence-detect (SPD) EEPROM

  • On-die VREFDQ generation and calibration

  • PCB: Height 1.18” (30.00mm)

  • Power Supply: VDD = 1.2V Typical

  • RoHS Compliant and Halogen-Free

  • Selectable BC4 or BL8 on-the-fly (OTF)

  • Single-rank

  • Terminated control command and address bus

  • VDDQ = 1.2V Typical

  • VDDSPD = 2.2V to 3.6V

  • VPP = 2.5V Typical




Reasons to buy

  • 8 internal banks; 2 groups of 4 banks each
  • Data bus inversion (DBI) for data bus
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Fly-by topology
  • Low-power auto self refresh (LPASR)
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • On-board I2 serial presence-detect (SPD) EEPROM
  • On-die VREFDQ generation and calibration
  • PCB: Height 1.18” (30.00mm)
  • Power Supply: VDD = 1.2V Typical
  • RoHS Compliant and Halogen-Free
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Single-rank
  • Terminated control command and address bus
  • VDDQ = 1.2V Typical
  • VDDSPD = 2.2V to 3.6V
  • VPP = 2.5V Typical

Product details

KVR26S19S6/4 Kingston 0740617280647

Kingston Technology ValueRAM KVR26S19S6/4 memory module 4 GB 1 x 4 GB DDR4 2666 MHz

£37.00 and

SKU: KVR26S19S6/4