Main product

Overview


Kingston's KSM24ED8/16ME is a 2G x 72-bit (16GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 2Rx8, ECC, memory module, based on eighteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers.




At-a-glance


  • 16 internal banks; 4 groups of 4 banks each

  • Data bus inversion (DBI) for data bus

  • data, strobe, and mask signals

  • Dual-rank

  • Fixed burst chop (BC) of 4 and burst length (BL) of 8

  • Fly-by topology

  • Low-power auto self refresh (LPASR)

  • Nominal and dynamic on-die termination (ODT) for

  • On-board I2 serial presence-detect (SPD) EEPROM

  • On-die VREFDQ generation and calibration

  • PCB: Height 1.23” (31.25mm)

  • Power Supply: VDD = 1.2V Typical

  • RoHS Compliant and Halogen-Free

  • Selectable BC4 or BL8 on-the-fly (OTF)

  • Temperature sensor with integrated SPD

  • Terminated control command and address bus

  • VDDQ = 1.2V Typical

  • VDDSPD = 2.2V to 3.6V

  • via the mode register set (MRS)

  • VPP = 2.5V Typical




Reasons to buy

  • 16 internal banks; 4 groups of 4 banks each
  • Data bus inversion (DBI) for data bus
  • data, strobe, and mask signals
  • Dual-rank
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8
  • Fly-by topology
  • Low-power auto self refresh (LPASR)
  • Nominal and dynamic on-die termination (ODT) for
  • On-board I2 serial presence-detect (SPD) EEPROM
  • On-die VREFDQ generation and calibration
  • PCB: Height 1.23” (31.25mm)
  • Power Supply: VDD = 1.2V Typical
  • RoHS Compliant and Halogen-Free
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Temperature sensor with integrated SPD
  • Terminated control command and address bus
  • VDDQ = 1.2V Typical
  • VDDSPD = 2.2V to 3.6V
  • via the mode register set (MRS)
  • VPP = 2.5V Typical

Specification

Technical Description: Kingston Technology KSM24ED8/16ME memory module 16 GB 1 x 16 GB DDR4 ECC
Features
JEDEC standard:
Yes
Windows operating systems supported:Windows vesions wich can be used with the device.
Yes
Lead plating:
Gold
Programming power voltage (VPP):
2.5 V
Row active time:
32 ns
Refresh row cycle time:
350 ns
Row cycle time:
46.16 ns
Module configuration:
2048M x 72
Memory voltage:The voltage (V) of the memory in the device.
1.2 V
Memory ranking:
2
CAS latency:Column Address Strobe (CAS) latency, or CL, is the delay time between the moment a memory controller tells the memory module to access a particular memory column on a RAM module, and the moment the data from the given array location is available on the module's output pins. In general, the lower the CAS latency, the better.
17
ECC:ECC means Error Correction Code, and it is memory that is able to detect and correct some memory errors without user intervention.
Yes
Memory form factor:Design of the memory e.g. 240-pin DIMM, SO-DIMM.
288-pin DIMM
Component for:What this product is used as a part of (component for).
PC/Server
Internal memory type:The type of internal memory such as RAM, GDDR5.
DDR4
Memory layout (modules x size):
1 x 16 GB
Internal memory:A computer's memory which is directly accessible to the CPU.
16 GB

Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-55 - 100 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 85 °C

Sustainability
Doesn't contain:
Halogen

Technical details
Compliance certificates:
RoHS

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
31.2 mm
Width:The measurement or extent of something from side to side.
133.3 mm

Product details

KSM24ED8/16ME Kingston

Kingston Technology KSM24ED8/16ME memory module 16 GB 1 x 16 GB DDR4 ECC

£185.99 and In stock

SKU: KSM24ED8/16ME

Kingston Technology KSM24ED8/16ME memory module 16 GB 1 x 16 GB DDR4 ECC

Quick Code: Q229608 MPN: KSM24ED8/16ME
£185.99

Quantity:
In Stock

Key Features

  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP = 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for
  • data, strobe, and mask signals