Antenna
Antenna gain level (max):Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction.
6 dBi
Antenna type:Type of antenna, also known an aerial, e.g. external, internal.
2x2 MIMO
Design
Placement:Where the product can be placed e.g. floor, wall.
Table, Wall
Cable lock slot:Holes on the edge of devices through which a cable lock can be passed, so the device can be locked to a desk etc.
Cable lock slot type:
Kensington
Internal:The product is built in.
Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Operating relative humidity (H-H):
5 - 95%
Packaging content
Performance
Certification:
FCC, CE, R&TTE 1995/5/EC, 72/23/EEC, EN 300 328, EN 301 489, EN 301 893, UL/IEC/EN 60950, EN 60601-1-1, EN 60601-1-2, CB, cTUVus, UL2043, WFA
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Modulation:Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.
16-QAM,64-QAM,256-QAM,BPSK,CCK,OFDM,QPSK
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11n,IEEE 802.3af,IEEE 802.3az
Quality of Service (QoS) support:
Throughput:Rate at which data can be transferred.
HT 20/40, VHT 20/40/80
Transmitting power:
21 dBmW
Spread spectrum method:
DSSS
Wi-Fi data rate (max):
867 Mbit/s
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100,1000 Mbit/s
Data transfer rate (max):The maximum speed with which data can be transmitted from one device to another.
867 Mbit/s
Ports & interfaces
DC-in jack:The socket/plug where the DC electricity supply connects to the device.
WAN connection:A wide area network (WAN) is a network that covers a broad area (i.e. any telecommunications network that links across metropolitan, regional, or national boundaries such as the Internet) using private or public network transports. Business and government entities utilize WANs to relay data among employees, clients, buyers, and suppliers from various geographical locations.
Ethernet (RJ-45)
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Power
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Power consumption (max):The maximum amount of power used by the device.
12.5 W
Weight & dimensions
Package weight:Weight of the packaged product.
550 g
Package height:The distance from the top to the bottom of the packaging.
57 mm
Package depth:The distance from the front to the back of the packaging.
187 mm
Package width:The distance from one side of the packaging to the other.
190 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
380 g
Height:The measurement of the product from head to foot or from base to top.
41.5 mm
Depth:The distance from the front to the back of something.
150 mm
Width:The measurement or extent of something from side to side.
150 mm
