Main product

Overview


A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex connectivity up to 10 km on one strand of singlemode fiber. The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE-standard 100BASE-BX10-D ("downstream") device.




Specification

Technical Description: HPE X112 100M SFP LC BX-U Transceiver network transceiver module Fiber optic 100 Mbit/s 1310 nm
Certificates
Certification:
WEEE

Certification
Certification:
WEEE

Performance
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Cabling technology:Type of cable technology performance.
100BASE-BX10-U
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3ah
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
10000 m
SFP transceiver standard:
BX
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP
Maximum data transfer rate:
100 Mbit/s
SFP transceiver type:
Fiber optic

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1 W

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
30 g
Height:The measurement of the product from head to foot or from base to top.
12.2 mm
Depth:The distance from the front to the back of something.
14 mm
Width:The measurement or extent of something from side to side.
68.6 mm

Product details

J9100B HPE 4054318216093

HPE X112 100M SFP LC BX-U Transceiver network transceiver module Fiber optic 100 Mbit/s 1310 nm

£22.99 and In stock

SKU: J9100B

HPE X112 100M SFP LC BX-U Transceiver network transceiver module Fiber optic 100 Mbit/s 1310 nm

Quick Code: Q3132206 MPN: J9100B
£22.99

In Stock