Certificates
Certification:
FCC, UL, CE
Compliance certificates:
RoHS
Certification
Certification:
FCC, UL, CE
Compliance certificates:
RoHS
Features
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
3092408 h
Logistics data
Country of origin:Country where the device is made.
China
Products per master (outer) case:
100 pc(s)
Master (outer) case height:
355 mm
Harmonized System (HS) code:
85369010
Master (outer) case length:
412 mm
Master (outer) case width:
347 mm
Operational conditions
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)
Packaging data
Package weight:Weight of the packaged product.
45 g
Package height:The distance from the top to the bottom of the packaging.
32 mm
Package depth:The distance from the front to the back of the packaging.
93 mm
Package width:The distance from one side of the packaging to the other.
118 mm
Performance
Digital Diagnostics Monitoring (DDM):
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3z
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
10000 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Maximum data transfer rate:
1250 Mbit/s
SFP transceiver type:
Fiber optic
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
16 g
Height:The measurement of the product from head to foot or from base to top.
13 mm
Depth:The distance from the front to the back of something.
57 mm
Width:The measurement or extent of something from side to side.
14 mm
