AddOn Networks E1MG-LX40-OM-AO network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm

Quick Code: Q574918 MPN: E1MG-LX40-OM-AO
£73.00

Out of Stock

Overview


This Brocade® E1MG-LX40-OM compatible SFP transceiver provides 1000Base-LH throughput up to 40km over single-mode fiber (SMF) at a wavelength of 1310nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Brocade® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Brocade®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.




Specification

Technical Description: AddOn Networks E1MG-LX40-OM-AO network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm
General
Type:Characteristics of the device.
Network Transceiver Modules

Packaging data
Package weight:Weight of the packaged product.
181.4 g
Package height:The distance from the top to the bottom of the packaging.
30.5 mm
Package depth:The distance from the front to the back of the packaging.
121 mm
Package width:The distance from one side of the packaging to the other.
70 mm

Performance
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
40000 m
SFP transceiver standard:
LH
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

E1MG-LX40-OM-AO Addon

AddOn Networks E1MG-LX40-OM-AO network transceiver module Fiber optic 1000 Mbit/s SFP 1310 nm

£73.00 and

SKU: E1MG-LX40-OM-AO