Features
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
2000000 h
RAID support:The device uses RAID, which is a storage technology that combines multiple disk drive components into a logical unit for the purposes of data redundancy and performance improvement. Data is distributed across the drives in one of several ways, referred to as RAID levels, depending on the specific level of redundancy and performance required.
Random write (8KB):
11000 IOPS
Random read (8KB):
55000 IOPS
Random write (4KB):
16000 IOPS
Random read (4KB):
97000 IOPS
Maximum write (4KB):
16000 IOPS
Maximum read (4KB):
97000 IOPS
Write speed:The speed at which a device can write data.
480 MB/s
Read speed:The speed at which a device can read data.
520 MB/s
Data transfer rate:Rate at which data can be transferred. Usually expressed in units per second. May vary with network configurations.
6 Gbit/s
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
256-bit AES
Component for:What this product is used as a part of (component for).
Server/workstation
NAND flash type:
eMLC (Enterprise Multi Level Cell)
Memory type:Type of memory in the device e.g. DDR3, SRAM (Static RAM).
eMLC
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Serial ATA
Logistics data
Harmonized System (HS) code:
84717070
Operational conditions
Non-operating shock:Environmental requirements for optimal protection from impact in non-operating mode
1500 G
Operating shock:Environmental requirements for optimal protection from impact in operating mode
1500 G
Non-operating vibration:Environmental requirements for vibration in non-operating mode
20 G
Operating vibration:Environmental requirements for vibration in operating mode
20 G
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Other features
Internal:The product is built in.
Power
Power consumption (average):
3 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
60 g
Height:The measurement of the product from head to foot or from base to top.
7 mm
Depth:The distance from the front to the back of something.
100.5 mm
Width:The measurement or extent of something from side to side.
69.8 mm
