Main product

Overview


10 Gigabit Small Form-Factor Pluggable Modules
The Allied Telesis SP10 Series offers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise and service provider transport applications. These industry-standard hot-swappable devices simply plug into the Ethernet SFP+ port on all SFP+-compatible devices. Configuration can be optimized to meet a wide variety of distance and service requirements.

Compatibility
Allied Telesis SP10 Series 10 Gigabit SFP+ modules are supported on all Allied Telesis devices with SFP+ uplink connections.

Options
The SP10 Series offers short-haul and long-haul solutions. From the inexpensive Allied Telesis SP10SR to the far-reaching Allied Telesis SP10ZR80/I, the network can be extended to meet any performance needs.

Interoperability
The SP10 Series SFP+ modules fully comply with industry-standard networking regulations. This allows the SP10 Series to be used with any networking equipment which complies with industry standards.

BiDi transceivers
Using an SFP BiDi transceiver can upgrade transmission capacity on a typical network—without installing new fibers—by utilizing a single fiber for both the send and receive signals.

Applications
The Allied Telesis 10G Long Reach Multimode (LRM) optic is designed to transmit and receive optical data over a legacy OM1 multi-mode fiber link up to 220m. This makes it ideal for high-speed storage area networks, computer cluster cross-connect and custom high-speed data pipes.

The extended temperature optics offer a wide operating temperature range of -40C to 85C, allowing deployment in even the harshest industrial environments.




At-a-glance


  • 10Gbps data rate

  • BiDi options available

  • Compact size

  • Compliant to SFF-8472 MSA

  • Compliant to SFP+ Electrical MSA SFF-8431

  • Digital diagnostics monitoring (DDM)

  • Flexible architecture

  • Hot-swappable

  • Lower power consumption < 1 Watt

  • Maximum data rate of 10.3Gbps

  • RoHS compliant




Reasons to buy

  • 10Gbps data rate
  • BiDi options available
  • Compact size
  • Compliant to SFF-8472 MSA
  • Compliant to SFP+ Electrical MSA SFF-8431
  • Digital diagnostics monitoring (DDM)
  • Flexible architecture
  • Hot-swappable
  • Lower power consumption < 1 Watt
  • Maximum data rate of 10.3Gbps
  • RoHS compliant

Specification

Technical Description: Allied Telesis AT-SP10LRA/I network transceiver module Fiber optic 10000 Mbit/s SFP+
Certificates
Compliance certificates:
RoHS

Certification
Compliance certificates:
RoHS

Features
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Housing material:
Metal
Product colour:
Silver

Logistics data
Harmonized System (HS) code:
85369010

Operational conditions
Operating relative humidity (H-H):
0 - 85%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 85 °C

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Performance
Digital Diagnostics Monitoring (DDM):
Yes
Link budget:
6 dB
Tx power (max):
1 dBmW
Tx power (min):
-8 dBmW
Rx wavelength (max):
1310 nm
Tx wavelength (max):
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
10000 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Sustainability
Sustainability compliance:
Yes

Product details

AT-SP10LRA/I Allied Telesis 0767035217857

Allied Telesis AT-SP10LRA/I network transceiver module Fiber optic 10000 Mbit/s SFP+

£795.93 and In stock

SKU: AT-SP10LRA/I

Allied Telesis AT-SP10LRA/I network transceiver module Fiber optic 10000 Mbit/s SFP+

Quick Code: Q42011 MPN: AT-SP10LRA/I
£795.93

Quantity:
In Stock

Key Features

  • 10Gbps data rate
  • Compact size
  • Flexible architecture
  • Hot-swappable
  • RoHS compliant
  • Compliant to SFP+ Electrical MSA SFF-8431