Overview



Allied Telesis AT-2711FX/LC-901. Internal. Connectivity technology: Wired, Host interface: PCI Express, Interface: Fiber. Maximum data transfer rate: 100 Mbit/s




Specification


Technical Description: Allied Telesis AT-2711FX/LC-901 network card Internal Fiber 100 Mbit/s

Design
LED indicators:
Yes
Internal:The product is built in.
Yes

Logistics data
Harmonized System (HS) code:
85176990

Network
Quality of Service (QoS) support:
Yes
VLAN tagging:
Yes
Jumbo frames support:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Wake-on-LAN ready:
Yes
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
SNMP
Cabling technology:Type of cable technology performance.
10/100BaseT(X)
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Yes
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1Q, IEEE 802.1as, IEEE 802.1p, IEEE 802.2, IEEE 802.3ac, IEEE 802.3u, IEEE 802.3x
Maximum data transfer rate:
100 Mbit/s

Networking
Quality of Service (QoS) support:
Yes
VLAN tagging:
Yes
Jumbo frames support:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Wake-on-LAN ready:
Yes
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
SNMP
Cabling technology:Type of cable technology performance.
10/100BaseT(X)
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Yes
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.1Q, IEEE 802.1as, IEEE 802.1p, IEEE 802.2, IEEE 802.3ac, IEEE 802.3u, IEEE 802.3x
Maximum data transfer rate:
100 Mbit/s

Operational conditions
Operating relative humidity (H-H):
5 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-25 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C

Other features
ACPI version:
2.0
Receive Side Scaling (RSS):
Yes
Flow control support:
Yes

Ports & interfaces
PCI version:
1.0
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Interface:Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2.
Fiber
Host interface:Interface that enables a host controller to communicate with a driver.
PCI Express
Connectivity technology:
Wired

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
2 W

System requirements
Linux operating systems supported:8 RT. Linux (9.4, 9.5), Red Hat Enterprise Linux 5.0 (supported with a pre-built package); SUSE Linux (10.3, 11.0, 11, 11.1, 11.2), Fedora (9, 9.0, 10, 10.0, 11.0, 11, 12, 12.0), Ubuntu (8.04, 8.04.1, 8.04.2, 8.10, 9.04, 9.10, 10.04), Debian (5.0, 5.0.1, 5.0.2, 5.0.3)
Yes

Technical details
Compliance certificates:
RoHS

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
50 g
Height:The measurement of the product from head to foot or from base to top.
69 mm
Width:The measurement or extent of something from side to side.
121 mm


Product details


AT-2711FX/LC-901 Allied Telesis 0767035196534

Allied Telesis AT-2711FX/LC-901 network card Internal Fiber 100 Mbit/s

£140.99 and In stock

SKUAT-2711FX/LC-901

Allied Telesis AT-2711FX/LC-901 network card Internal Fiber 100 Mbit/s

Quick Code: Q2012508 MPN: AT-2711FX/LC-901
£140.99

Quantity:
In Stock