AddOn Networks AH-ACC-SFP-10G-SR-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Quick Code: Q574180 MPN: AH-ACC-SFP-10G-SR-AO
£190.99

Out of Stock

Overview



This Aerohive® AH-ACC-SFP-10G-SR compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Aerohive® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Aerohive®, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Trade Agreements Act (TAA) versions of this part are available upon request.




Specification


Technical Description: AddOn Networks AH-ACC-SFP-10G-SR-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

General
Type:Characteristics of the device.
Network Transceiver Modules

Packaging data
Package weight:Weight of the packaged product.
181 g
Package height:The distance from the top to the bottom of the packaging.
30.5 mm
Package depth:The distance from the front to the back of the packaging.
120.7 mm
Package width:The distance from one side of the packaging to the other.
69.8 mm

Performance
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
300 m
SFP transceiver standard:
SR
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic


Product details


AH-ACC-SFP-10G-SR-AO Addon

AddOn Networks AH-ACC-SFP-10G-SR-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

£190.99 and

SKUAH-ACC-SFP-10G-SR-AO