AddOn Networks 10GBase-DWDM SFP+ 40km network transceiver module Fiber optic 10000 Mbit/s SFP+ 1554.94 nm

Quick Code: Q1829315 MPN: 821455041642-XEX
£3889.99

Out of Stock

Overview


AddOn's industry-standard SFP+ is a hot-swappable input/output device that plugs into a Gigabit Ethernet slot, linking the port with the fiber-optic network. AddOn's transceivers (GBIC, SFP, XFP and XENPAK) are 100% compliant for all of our networking product lines. AddOn transceivers are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.




Specification

Technical Description: AddOn Networks 10GBase-DWDM SFP+ 40km network transceiver module Fiber optic 10000 Mbit/s SFP+ 1554.94 nm
Certificates
Certification:
IEC 60825-1, IEC 60825-2, MSA
Compliance certificates:
RoHS

Certification
Certification:
IEC 60825-1, IEC 60825-2, MSA
Compliance certificates:
RoHS

Features
Compatible products:Other products that can be used with this product.
Cisco
Hot-swap:
Yes

General
Type:Characteristics of the device.
Network Transceiver Modules

Performance
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1554.94 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
40000 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
68 g
Height:The measurement of the product from head to foot or from base to top.
7.6 mm
Depth:The distance from the front to the back of something.
56 mm
Width:The measurement or extent of something from side to side.
12.7 mm

Product details

821455041642-XEX Addon

AddOn Networks 10GBase-DWDM SFP+ 40km network transceiver module Fiber optic 10000 Mbit/s SFP+ 1554.94 nm

£3889.99 and

SKU: 821455041642-XEX


Parent Product

DWDM-SFP10G-54.94-AO Addon


MPN: DWDM-SFP10G-54.94-AO