Certificates
Compliance certificates:
RoHS
Certification
Compliance certificates:
RoHS
Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
General
Type:Characteristics of the device.
Network Transceiver Modules
Operational conditions
Storage relative humidity (H-H):
10 - 80%
Operating relative humidity (H-H):
10 - 80%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Performance
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Cabling technology:Type of cable technology performance.
10GBASE-SR
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3u
SFP transceiver standard:
SR
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic
Power
Input voltage:The voltage (V) which is required to power the product.
3.3 V
