Certificates
Certification:
FCC Class A, CE, RoHS, IEC-60825
Compliance certificates:
RoHS
Certification
Certification:
FCC Class A, CE, RoHS, IEC-60825
Compliance certificates:
RoHS
Features
Hot-Plug support:Device has hot-plug capability, which means that user can replace system components without shutting down the system.
Logistics data
Harmonized System (HS) code:
85369010
Operational conditions
Operating relative humidity (H-H):
10 - 85%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)
Performance
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3z
Ethernet interface type:
Gigabit Ethernet
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
20000 m
SFP transceiver standard:
LX
Fiber cable diameters supported (core/cladding):
9/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Single-mode fiber (SMF) supported:
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1 W
Input voltage:The voltage (V) which is required to power the product.
3.3 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
62 g
Height:The measurement of the product from head to foot or from base to top.
12 mm
Depth:The distance from the front to the back of something.
55 mm
Width:The measurement or extent of something from side to side.
13 mm
