Main product

Overview


5 m CAT6a Patch Cable Shielded (STP) Snagless 100% Copper Wire Black

This CAT6a Ethernet cable meets all Category 6a cable specifications. It ensures reliable 10Gb connections between your network devices.

Shield Your Network

Tested for up to 500MHz frequency, each CAT6a cable is more than suitable for 10GBase-T Ethernet networks.

Built for quality performance, the cable features 100% copper and foil-shielded, twisted-pair wiring. The cable is designed to keep the data signals traveling through your network free from noise and interference. It's perfect in environments that are prone to large amounts of electromagnetic interference (EMI/RFI).

Protect Your Equipment

This CAT6a patch cable is built using 100% copper wire and is tested to comply with ANSI/TIA 568 C.2 Category 6a requirements. We don’t use copper-clad aluminum (CCA) wire which is subject to problems like weak power delivery, heat buildup, equipment damage and possibly fire.

The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.

Easily Install Your Network Cables

For trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break.

The CAT6a Ethernet cable also features moulded boots which offer strain relief by stopping the RJ45 connectors from bending at sharp angles. This reduces the risk of cable damage, which could decrease network connectivity and performance. ETL Verified

Our Cat6a Ethernet Cables are ETL Verified to meet ANSI/TIA-568.2-D standards, ensuring peak performance for high-speed 10G applications. Independent testing confirms compliance with strict insertion loss, return loss, and crosstalk limits, maintaining stable signal transmission over longer runs. The STP shielding is verified for EMI resistance, for guaranteed reliability in demanding environments.

6ASPAT5MBK is backed by StarTech.com’s lifetime warranty for guaranteed reliability.




Reasons to buy

  • HIGH PERFORMANCE CAT6A ETHERNET CABLE: 100% copper for consistent & error-free 10 gigabit connection. Individually Tested complies with ANSI/TIA-568-B.2-10 Category 6 requirements; ETL Verified to meet ANSI/TIA-568.2-D standards
  • POE SUPPORT: 26 AWG stranded copper conductors & UL Rated Wiring (E132276-A) supports up to 100W for PoE devices like VOIP phone & security systems. IEEE 802.3bt & DTE power compliant prevents cable heating up
  • PROTECT YOUR NETWORK: Shielded RJ45 connectors minimize Near-End Crosstalk (NEXT) & protect against noise & electromagnetic (EMI/RFI) interference; Compatible w/ multi-speed 10Base-T/NBASE-T generation
  • QUALITY CONSTRUCTION: 50-micron gold-plated connectors for clear signal & to stop rust/corrosion. Snagless connector enables easy installation & flexible disconnection of patch cord in wiring conduits
  • SPECS: 10 GbE; Length: 5 m (16.4 ft); Color: Black; Structure: 4 Pair STP; Connector: Snagless; Jacket Type: PVC; Wire Gauge: 26 AWG Copper; Wiring Standard: ANSI/TIA-568-B.2-10; Warranty: Lifetime

Specification

Technical Description: StarTech.com CAT6a Networking Cables - Black
Certificates
Certification:
REACH, CE
Compliance certificates:
RoHS

Certification
Certification:
REACH, CE
Compliance certificates:
RoHS

Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Snagless cable boot:
Yes
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Frequency:
500 MHz
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
10000 Mbit/s
AWG wire size:
26
Cabling technology:Type of cable technology performance.
10GBase-T
Cable rating:
CMG (CM)
Conductor material:
Copper
Conductor type:
Stranded
Jacket material:
Polyvinyl chloride (PVC)
Connector contacts plating:What the connector contacts are covered with (layer on top).
Gold
Connector 1 gender:
Male
Connector 2 gender:
Male
Connector 2:This is the second connector in the device.
RJ-45
Connector 1:This is the first connector in the device.
RJ-45
Product colour:
Black
Cable shielding:The protective layer for the cable, typically made of plastic.
S/UTP (STP)
Cable standard:The category of the cable, which is determined by performance characteristics and test requirements.
Cat6a
Cable length:How long the cable is.
5 m

General
Type:Characteristics of the device.
Networking Cables

Logistics data
Products per master (outer) case:
50 pc(s)
Master (outer) case height:
275 mm
Master (outer) case length:
410 mm
Master (outer) case width:
365 mm
Harmonized System (HS) code:
84733080

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package weight:Weight of the packaged product.
210 g
Package depth:The distance from the front to the back of the packaging.
200 mm
Package width:The distance from one side of the packaging to the other.
220 mm

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
200 g

Product details

6ASPAT5MBK StarTech.com 0065030881562

StarTech.com CAT6a Networking Cables - Black

£25.00 and In stock

SKU: 6ASPAT5MBK

StarTech.com CAT6a Networking Cables - Black

Quick Code: Q299573 MPN: 6ASPAT5MBK
£25.00

Quantity:
In Stock
delivery_truck_speedOrder Now, and get it tomorrow, Friday 31st July

Key Features

  • SPECS: 10 GbE
  • Length: 5 m (16.4 ft)
  • Color: Black
  • Structure: 4 Pair STP