Main product

Overview


10 m CAT6a Patch Cable Shielded (STP) Snagless 100% Copper Wire Aqua

This CAT6a Ethernet cable meets all Category 6a cable specifications. It ensures reliable 10Gb connections between your network devices.

Shield Your Network

Tested for up to 500MHz frequency, each CAT6a cable is more than suitable for 10GBase-T Ethernet networks.

Built for quality performance, the cable features 100% copper and foil-shielded, twisted-pair wiring. The cable is designed to keep the data signals traveling through your network free from noise and interference. It's perfect in environments that are prone to large amounts of electromagnetic interference (EMI/RFI).

Protect Your Equipment

This CAT6a patch cable is built using 100% copper wire and is tested to comply with ANSI/TIA 568 C.2 Category 6a requirements. We don’t use copper-clad aluminum (CCA) wire which is subject to problems like weak power delivery, heat buildup, equipment damage and possibly fire.

The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.

Easily Install Your Network Cables

For trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break.

The CAT6a Ethernet cable also features moulded boots which offer strain relief by stopping the RJ45 connectors from bending at sharp angles. This reduces the risk of cable damage, which could decrease network connectivity and performance.

6ASPAT10MAQ is backed by StarTech.com’s lifetime warranty for guaranteed reliability.

The StarTech.com Advantage

- Shield your data against noise and EMI/RFI interference using this CAT6a Ethernet cable
- Supports 10GBase-T Ethernet networks
- Protect your network and equipment with 100% copper wire CAT6a cables




At-a-glance


  • Each patch cable is tested to comply with ANSI/TIA 568 C.2 CAT6a requirements

  • Protect your network and equipment with 100% copper wire CAT6a cables

  • RJ45 connector-clip protectors eliminate cable snags and breaks during installation

  • Shield your data against noise and EMI/RFI interference using this CAT6a Ethernet cable

  • Supports 10GBase-T Ethernet networks




Reasons to buy

  • Each patch cable is tested to comply with ANSI/TIA 568 C.2 CAT6a requirements
  • Protect your network and equipment with 100% copper wire CAT6a cables
  • RJ45 connector-clip protectors eliminate cable snags and breaks during installation
  • Shield your data against noise and EMI/RFI interference using this CAT6a Ethernet cable
  • Supports 10GBase-T Ethernet networks

Specification

Technical Description: StarTech.com CAT6a Ethernet Cable
Certificates
Certification:
REACH, CE
Compliance certificates:
RoHS

Certification
Certification:
REACH, CE
Compliance certificates:
RoHS

Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Snagless cable boot:
Yes
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Frequency:
500 MHz
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
10000 Mbit/s
AWG wire size:
26
Cabling technology:Type of cable technology performance.
10GBase-T
Cable rating:
CMG (CM)
Conductor material:
Copper
Conductor type:
Stranded
Jacket material:
Polyvinyl chloride (PVC)
Connector contacts plating:What the connector contacts are covered with (layer on top).
Gold
Connector 1 gender:
Male
Connector 2 gender:
Male
Connector 2:This is the second connector in the device.
RJ-45
Connector 1:This is the first connector in the device.
RJ-45
Product colour:
Aqua colour
Cable shielding:The protective layer for the cable, typically made of plastic.
S/UTP (STP)
Cable standard:The category of the cable, which is determined by performance characteristics and test requirements.
Cat6a
Cable length:How long the cable is.
10 m

General
Type:Characteristics of the device.
Networking Cables

Logistics data
Harmonized System (HS) code:
84733080

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package weight:Weight of the packaged product.
400 g
Package depth:The distance from the front to the back of the packaging.
255 mm
Package width:The distance from one side of the packaging to the other.
330 mm

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
380 g

Product details

6ASPAT10MAQ StarTech.com 0065030881654

StarTech.com CAT6a Ethernet Cable

£34.00 and

SKU: 6ASPAT10MAQ

StarTech.com CAT6a Ethernet Cable

Quick Code: Q303426 MPN: 6ASPAT10MAQ
£34.00

Out of Stock