Main product

Overview


This Alcatel-Lucent Nokia® 3AL82048AF compatible SFP+ transceiver provides 10GBase-CWDM throughput up to 80km over single-mode fiber (SMF) using a wavelength of 1570nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. The listed reach has been determined using a link budget calculation and tested in a standard environment. Actual link distances achieved will be dependent upon the deployed environment. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Alcatel-Lucent Nokia®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. We stand behind the quality of our products and proudly offer a limited lifetime warranty.




Specification

Technical Description: AddOn Networks 3AL82048AF-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1570 nm
Certificates
Certification:
TAA

Certification
Certification:
TAA

Features
Brand compatibility:What other brands this brand can be used with.
Alcatel-Lucent
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Product colour:
Silver

General
Type:Characteristics of the device.
Network Transceiver Modules

Operational conditions
Maximum operating temperature:
85 °C
Minimum operating temperature:
-40 °C

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package weight:Weight of the packaged product.
882 g
Package height:The distance from the top to the bottom of the packaging.
30.5 mm
Package depth:The distance from the front to the back of the packaging.
120.7 mm
Package width:The distance from one side of the packaging to the other.
70 mm

Performance
Fiber ethernet cabling technology:
10GBASE
Coarse Wavelength Division Multiplexing (CWDM):
Yes
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1570 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
80000 m
SFP transceiver standard:
CWDM
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

3AL82048AF-AO Addon

AddOn Networks 3AL82048AF-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1570 nm

£4267.99 and

SKU: 3AL82048AF-AO

AddOn Networks 3AL82048AF-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1570 nm

Quick Code: Q733889 MPN: 3AL82048AF-AO
£4267.99

Out of Stock