AddOn Networks 10GB-LR-SFPP-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

Quick Code: Q571996 MPN: 10GB-LR-SFPP-AO
£283.00

Out of Stock

Overview


AddOn's 10GB-LR-SFPP-AO is a Enterasys compatible SFP+ transceiver that operates at 1310nm over Single-Mode Fiber, with a maximum reach of 10km connected via a LC connector built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.

AddOn transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant for all networking product lines, and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.

AddOn Computer has developed a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. With our ADDON CERTIFICATION TEST Program, we can guarantee your product will work right the first time. AddOn products are guaranteed by the MAGNUSON-MOSS WARRANTY ACT to not affect or void OEM warranties.




Specification

Technical Description: AddOn Networks 10GB-LR-SFPP-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm
General
Type:Characteristics of the device.
Network Transceiver Modules

Operational conditions
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C

Performance
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
10000 m
SFP transceiver standard:
LR
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

10GB-LR-SFPP-AO Addon

AddOn Networks 10GB-LR-SFPP-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm

£283.00 and

SKU: 10GB-LR-SFPP-AO