Certificates
Compliance certificates:
RoHS
Certification
Compliance certificates:
RoHS
Features
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
4655371 h
Housing material:
Aluminium
Logistics data
Country of origin:Country where the device is made.
China
Products per master (outer) case:
100 pc(s)
Master (outer) case height:
340 mm
Harmonized System (HS) code:
85369010
Master (outer) case length:
410 mm
Master (outer) case width:
355 mm
Operational conditions
Operating relative humidity (H-H):
30 - 75%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C
Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)
Packaging data
Package weight:Weight of the packaged product.
53 g
Package height:The distance from the top to the bottom of the packaging.
34 mm
Package depth:The distance from the front to the back of the packaging.
92 mm
Package width:The distance from one side of the packaging to the other.
118 mm
Performance
Digital Diagnostics Monitoring (DDM):
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3ab
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
100 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
MiniGBIC
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Copper
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1.3 W
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
25 g
Height:The measurement of the product from head to foot or from base to top.
14 mm
Depth:The distance from the front to the back of something.
68 mm
Width:The measurement or extent of something from side to side.
14 mm
