Main product

Overview


What This Product Does
TL-SF1008P is an 8 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to ­fix devices such as APs, IP Cameras or IP Phones, etc.

Power over Ethernet
4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).

-Overload Arrangement
TL-SF1008P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 57W, a priority will be arranged among the PoE ports, then the system will cut o- the power of the lowest-priority port.

-Port Priority Function
Priority (port-1=port-2=port-3>port-4): This function will help to ensure the normal operation of the system, it means Port 4 will be cut off when all total PoE PDs power consumption exceed 57W. For an example, Port 1, 2 and 4 is using 15.4W (maximum power for per port is 15.4W); the system power is 46.2W in total. If there is an additional PD inserted to Port 3 with 12W, and then the system will cut off the power of Port 4 because of the overloaded power, this means Port 1, 2 will use 15.4W, and Port3 will use 12W, no power will be supplied to Port 4.

Easy To Use
TL-SF1008P is easy to install and use. It requires no confi­guration and installation. With desktop design, outstanding performance and quality, the TP-LINK’s TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE is an ideal choice for expanding your home or office network.




At-a-glance


  • Requires no configuration and installation

  • Supports PoE power up to 15.4W for each PoE port

  • Supports PoE power up to 57W for all PoE ports

  • With four PoE ports, transfers data and power on one single cable

  • Working with IEEE 802.3af compliant PDs, expands home and office network




Reasons to buy

  • Requires no configuration and installation
  • Supports PoE power up to 15.4W for each PoE port
  • Supports PoE power up to 57W for all PoE ports
  • With four PoE ports, transfers data and power on one single cable
  • Working with IEEE 802.3af compliant PDs, expands home and office network

Specification

Technical Description: TP-Link TL-SF1008P network switch Unmanaged Fast Ethernet (10/100) Power over Ethernet (PoE) Olive
Certificates
Compliance certificates:
CE, Federal Communications Commission (FCC), RoHS

Certification
Compliance certificates:
CE, Federal Communications Commission (FCC), RoHS

Data transmission
Store-and-forward:
Yes
Forwarding rate:
1.1904 Mpps
Switching capacity:The data transfer capacity of the switch per second.
1.6 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
2000 entries

Design
Wall mountable:The product can be mounted on (attached to ) a wall.
Yes
LED indicators:
Yes
Housing material:
Metal
Product colour:
Black
Stackable:Devices can be placed on top of each other.
No
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
No

General
Type:Characteristics of the device.
Network Switches

Logistics data
Harmonized System (HS) code:
85176990

Management features
Switch type:What switch device has, managed or unmanaged.
Unmanaged

Network
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology:
10GBASE-T, 100BASE-TX
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x

Networking
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Cable types supported:
Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology:
10GBASE-T, 100BASE-TX
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x

Operational conditions
Heat dissipation:The heat generated by the power supply.
248.93 BTU/h
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C

Packaging content
User guide:
Yes

Packaging data
Package weight:Weight of the packaged product.
970 g
Package height:The distance from the top to the bottom of the packaging.
68 mm
Package depth:The distance from the front to the back of the packaging.
280 mm
Package width:The distance from one side of the packaging to the other.
223 mm
AC adapter included:
Yes
Package type:The type of product package e.g. box.
Box

Performance
Fanless:
Yes

Ports & interfaces
Power connector:
DC-in jack
Installed SFP+ modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The enhanced small form-factor pluggable (SFP+) is an enhanced version of the SFP that supports data rates up to 10 Gbit/s. The "SFP+ ports quantity" is the number of ports for SFP+ connections in a device.
0
Installed SFP modules quantity:An SFP ("small form-factor pluggable transceiver") is a transmitter/receiver which interfaces a network device motherboard (e.g. in a switch, router) to a fibre optic or copper network cable. The "SFP ports quantity" is the number of ports for SFP connections in a device.
0
Fast Ethernet (copper) ports quantity:
8
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
8

Power
Power consumption (max):The maximum amount of power used by the device.
66 W
Input current:
1.31 A
DC input voltage:
53.5 V
AC input frequency:
50 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
220 V
Power supply included:There is a power supply with this product.
No
Power source:What is providing power for the product e.g. mains electricity.
DC/PoE

Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget:
57 W
Power over Ethernet plus (PoE+) ports quantity:
8
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes

Protocols
IPv4 & IPv6 features:
IPv6 portal

Sustainability
Sustainability compliance:
Yes

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
27 mm
Depth:The distance from the front to the back of something.
98 mm
Width:The measurement or extent of something from side to side.
171 mm

Product details

0151903616390-XEX TP-LINK 6935364020682

TP-Link TL-SF1008P network switch Unmanaged Fast Ethernet (10/100) Power over Ethernet (PoE) Olive

£51.33 and In stock

SKU: 0151903616390-XEX


Parent Product

TL-SF1008P TP-LINK


MPN: TL-SF1008P

TP-Link TL-SF1008P network switch Unmanaged Fast Ethernet (10/100) Power over Ethernet (PoE) Olive

Quick Code: Q313740 MPN: 0151903616390-XEX
£51.33

Quantity:
In Stock