Design
Market positioning:
Industrial
Display
Display diagonal (metric):This is the size of the display screen, measured diagonally.
55 cm
Viewable size, vertical:
26.8 cm
Viewable size, horizontal:The viewable size is often somewhat smaller than the actual size of a monitor, because there is a border around the image.
47.7 cm
Viewing angle, vertical:Maximum vertical angle at which a display can be viewed with acceptable visual performance.
178°
Viewing angle, horizontal:Maximum horizontal angle at which a display can be viewed with acceptable visual performance.
178°
Contrast ratio (typical):The difference in light intensity between the brightest white and the darkest black.
10000:1
Response time:The response time is the time difference between the moment that a source (for example a video card) sends a signal and that equipment (for example a monitor) receives or display the signal. (Used abbreviations: R/F = Rise and Fall.)
5 ms
Display brightness (typical):
250 cd/m²
HD type:Type of supported High Definition (e.g. Full HD, 4K Ultra HD).
Full HD
Touchscreen:A screen of a laptop, smartphone, etc., that responds to touch so you can control the interface using your fingers.
Display technology:The technology used in the display e.g. plasma, LED.
LED
Native aspect ratio:The aspect ratio is the ratio of the width of an image to its height. The native aspect ratio is the one which the projector/display is particularly designed for. Images shown in native aspect ratio will utilize the entire resolution of the display and achieve maximum brightness. Images shown in other than native aspect ratio will always have less resolution and less brightness than images shown in native aspect ratio.
16:9
Display resolution:The number of distinct pixels in each dimension that can be displayed. It is usually quoted as width × height, with the units in pixels: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels. The higher the number of pixels, the sharper the image.
1920 x 1080 pixels
Display diagonal:Size of the display for this product, measured diagonally, usually in inches.
55.9 cm (22")
Ergonomics
Panel mounting interface:
100 x 100 mm
Multimedia
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
6 W
Number of speakers:The quantity of speakers included in/with the product.
2
Built-in speaker(s):The device contains speaker(s) to produce sound.
Other features
Picture enhancement:
DNIe digital image processing
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
50000 h
Depth:The distance from the front to the back of something.
48 mm
Height:The measurement of the product from head to foot or from base to top.
580 mm
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
2.5 kg
Width:The measurement or extent of something from side to side.
310 mm
Packaging content
Quick start guide:Instructions, either online, as a computer program or in paper form, to allow you to set up and start using the product quickly.
Packaging data
Package weight:Weight of the packaged product.
3.5 kg
Package height:The distance from the top to the bottom of the packaging.
550 mm
Package depth:The distance from the front to the back of the packaging.
110 mm
Package width:The distance from one side of the packaging to the other.
420 mm
Ports & interfaces
BNC input ports:Ports (sockets) to connect BNC inputs. The BNC connector (Bayonet Neill–Concelman) is a miniature quick connect/disconnect RF connector used for coaxial cable.
1
Audio output:The type of audio output that the device produces, and the connector(s).
Audio input:The type of audio input that the device requires, and the connection needed.
HDMI ports quantity:The number of sockets (ports) for HDMI connections. HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
1
HDMI:HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for existing analog video standards.
VGA (D-Sub) ports quantity:Number of VGA (D-Sub) ports (connecting interfaces) in the device. The VGA (D-Sub) connector is a 15 pin connector between a computer and a monitor. It was first introduced in 1987 by IBM.
1
USB Type-A downstream ports quantity:
1
Power
European Product Registry for Energy Labelling (EPREL) code:
1427684
Power consumption (average):
25 W
Energy consumption (SDR) per 1000 hours:
11 kWh
Energy efficiency class (HDR):
Not available
Energy efficiency class (SDR):
D
