AddOn Networks XFP-10G-S-AO network transceiver module Fiber optic 10000 Mbit/s 850 nm

Quick Code: Q577880 MPN: XFP-10G-S-AO
£271.99

Out of Stock

Overview


AddOn's XFP-10G-S-AO is a Juniper compatible XFP transceiver that operates at 850nm over Multi-Mode Fiber, with a maximum reach of 300m connected via a LC connector built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.

AddOn transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant for all networking product lines, and are factory loaded with OEM specific configuration data required for networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.




Specification

Technical Description: AddOn Networks XFP-10G-S-AO network transceiver module Fiber optic 10000 Mbit/s 850 nm
Certificates
Certification:
UL, cUL FCC Part 15 Class B
Compliance certificates:
RoHS

Certification
Certification:
UL, cUL FCC Part 15 Class B
Compliance certificates:
RoHS

General
Type:Characteristics of the device.
Network Transceiver Modules

Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C

Performance
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
0
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
300 m
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Interface type:
XFP
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1.5 W

Product details

XFP-10G-S-AO Addon

AddOn Networks XFP-10G-S-AO network transceiver module Fiber optic 10000 Mbit/s 850 nm

£271.99 and

SKU: XFP-10G-S-AO