Ubiquiti PowerBeam AC ISO Gen2 Network bridge 450 Mbit/s White

Quick Code: Q398677 MPN: PBE-5AC-ISO-GEN2
£122.99

In Stock

Overview



5 GHz airMAX® ac Bridge with RF Isolated Reflector
Incorporating advanced engineering with proprietary airMAX ac technology, the PowerBeam® ac ISO is ideal for deployments requiring maximum performance and RF isolation.

Performance Breakthrough
airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.

Innovative Mechanical Design
The integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.

Superior RF Isolation
Compare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.

Superior Processing
Ubiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

Advanced Software Technology
Ubiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.




Specification


Technical Description: Ubiquiti PowerBeam AC ISO Gen2 Network bridge 450 Mbit/s White

Antenna
Antenna gain level (max):Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction.
25 dBi

Certificates
Certification:
RoHS, CE, FCC, IC

Data transmission
Maximum data transfer rate:
450 Mbit/s

Features
Internal memory:The amount of memory, usually measured in bytes (e.g. MB, GB), which is installed in the system's hardware.
64 MB
Processor model:The model number for the processor in a computer.
MIPS 74Kc
Quality of Service (QoS) support:
Yes
Surge protection:
Yes
LED indicators:
LAN, Power, Signal strength
Product colour:
White
Material:The material from which a thing is or can be made e.g. wood, plastic.
Metal
Product type:The sub-category of the product.
Network bridge

General
Type:Characteristics of the device.
Bridges & Repeaters

Logistics data
Harmonized System (HS) code:
85176990

Network
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Yes

Networking
Ethernet LAN:An Ethernet LAN (Local Area Network) interface is present, for a wired conection via a cable.
Yes

Operational conditions
Operating relative humidity (H-H):
5 - 95%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 158 °F
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 70 °C

Ports & interfaces
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1

Power
Power consumption (24V):
500 mA
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Power consumption (max):The maximum amount of power used by the device.
8.5 W
DC input voltage:
20 - 26 V
Power source type:What the power source is.
PoE

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
3.22 kg
Dimensions (WxDxH):Dimensions of the product (Width x Depth x Height).
459 x 261 x 459 mm

Wireless LAN features
Modulation:Modulation is the process of varying one or more properties of a periodic waveform, called the carrier signal (High Frequency Signal), with a modulating signal which typically contains information to be transmitted. The aim of digital modulation is to transfer a digital bit stream over an analog bandpass channel, for example over the public switched telephone network (where a bandpass filter limits the frequency range to between 300 and 3400 Hz), or over a limited radio frequency band. The aim of analog modulation is to transfer an analog baseband (or lowpass) signal, for example an audio signal or TV signal, over an analog bandpass channel at a different frequency, for example over a limited radio frequency band or a cable TV network channel.
16-QAM, 64-QAM, 256-QAM, BPSK, QPSK
Frequency band:A small section of the spectrum of radio communication frequencies, in which channels are usually used or set aside for the same purpose e.g.for a channel on FM radio; for mobile networks to communicate with mobile phones.
5.150 - 5.850 GHz


Product details


PBE-5AC-ISO-GEN2 Ubiquiti

Ubiquiti PowerBeam AC ISO Gen2 Network bridge 450 Mbit/s White

£122.99 and In stock

SKUPBE-5AC-ISO-GEN2