Features
Endurance:
10000 cycles per logical sector
Protection features:Physical effects from which the product is protected e.g. water resistant, crash proof.
Magnet proof, Temperature proof, Waterproof, X-ray proof
General
Type:Characteristics of the device.
Memory Cards
Memory
Application performance class:
A2
Internal memory type:The type of internal memory such as RAM, GDDR5.
UHS-I
UHS Speed Class:
Class 3 (U3)
Write speed:The speed at which a device can write data.
130 MB/s
Read speed:The speed at which a device can read data.
180 MB/s
Flash memory class:Class ratings measure the minimum sustained speed required for recording an even rate of video onto the flash memory card. The class rating number corresponds to the transfer rate measured in megabytes per second. Class 2 cards are designed for a minimum sustained transfer rate of 2 megabytes per second (MB/s), while Class 10 cards are designed for a minimum sustained transfer rate of 10MB/s.
Class 3
Flash card type:A flash card is a computer storage device electrically erased and reprogrammed. Types of flash cards include CompactFlash (CF), Memory Stick (MS) etc.
MicroSD
Capacity:Capacity of the storage media.
256 GB
Operational conditions
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-25 - 85 °C
Other features
Compliance certificates:
CE, Federal Communications Commission (FCC), UKCA
Packaging content
Memory adapter included:
SD
Packaging data
Quantity per pack:The amount in each pack.
1 pc(s)
Power
Memory voltage:The voltage (V) of the memory in the device.
2.7,3.6 V
Sustainability
Sustainability compliance:
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
0.25 g
Height:The measurement of the product from head to foot or from base to top.
11 mm
Depth:The distance from the front to the back of something.
1 mm
Width:The measurement or extent of something from side to side.
15 mm