Certificates
Compliance certificates:
CE, RoHS
Certification
Compliance certificates:
CE, RoHS
Features
Housing material:
Aluminium
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Internal:The product is built in.
Logistics data
Products per master (outer) case:
10 pc(s)
Master (outer) case height:
225 mm
Master (outer) case length:
345 mm
Master (outer) case width:
355 mm
Harmonized System (HS) code:
85176990
Network
Cable types supported:
Cat6
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3x
Maximum data transfer rate:
1000 Mbit/s
Networking
Cable types supported:
Cat6
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3x
Maximum data transfer rate:
1000 Mbit/s
Operational conditions
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 75 °C
Packaging content
Packaging data
Package weight:Weight of the packaged product.
386 g
Package height:The distance from the top to the bottom of the packaging.
64 mm
Package depth:The distance from the front to the back of the packaging.
162 mm
Package width:The distance from one side of the packaging to the other.
211 mm
Performance
Mean time between failures (MTBF):Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism.
569265 h
Fiber mode structure:
Multi-mode, Single-mode
Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SFP
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Input voltage:The voltage (V) which is required to power the product.
12 - 56 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
144 g
Height:The measurement of the product from head to foot or from base to top.
32 mm
Depth:The distance from the front to the back of something.
104 mm
Width:The measurement or extent of something from side to side.
81.5 mm
