PLANET IGS-10080MFT network switch Managed Gigabit Ethernet (10/100/1000) Blue, White

Quick Code: Q1340210 MPN: IGS-10080MFT
£155.99

Add to basket
In Stock

Key Features

  • Physical Port
  • Industrial Case / Installation
  • IP30 Aluminum case protection
  • DIN-Rail and Wall Mount Design
  • Redundant Power Design
  • AC 24V power adapter acceptable
  • Supports EFT protection 6000 VDC for power line
  • Supports 6000 VDC Ethernet ESD protection
  • Minus 40 to 75 Degree C operation temperature
  • Industrial Protocol
  • IEEE 1588v2 PTP (Precision Time Protocol)
  • Layer 2 Features
  • Storm Control support
  • Multicast/Unknown-Unicast
  • Supports VLAN
  • IEEE 802.1Q tagged VLAN
  • Up to 255 VLANs groups, out of 4095 VLAN IDs
  • Private VLAN
  • Protocol-based VLAN
  • MAC-based VLAN
  • Voice VLAN
  • Supports Spanning Tree Protocol
  • Supports Link Aggregation
  • 802.3ad Link Aggregation Control Protocol (LACP)
  • Cisco ether-channel (Static Trunk)
  • Up to 26Gbps bandwidth(Duplex Mode)
  • Provides Port Mirror (many-to-1)
  • Quality of Service
  • 8 priority queues on all switch ports
  • Traffic classification
  • IEEE 802.1p CoS
  • IP TOS/DSCP/IP Precedence
  • IP TCP/UDP port number

Overview


Multiple SFP Fiber Port Switch for Growing Long-Reach Networking of Industry and Telecom

PLANET IGS-10080MFT is an Industrial 10-Port Full Gigabit Managed Ethernet Switch specially designed to build a full Gigabit backbone to transmit reliable, high speed data in heavy industrial demanding environments and also can forward data to remote network through fiber optic. It provides two 100/1000/2500BASE-X and six 100/1000BASE-X SFP fiber optic ports, two extra 10/100/1000BASE-T copper interfaces delivered in an IP30 rugged case with redundant power system. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-10080MFT can be placed in almost any harsh environment.


IPv6 / IPv4 Full-Functioned Managed Switch for Building Automation Networking

The IGS-10080MFT is the ideal solution to fulfill the demand of IPv6 management Gigabit Ethernet Switch, especially in the Industrial hardened environment. It supports both IPv4 and IPv6 management functions and can work with original network structure. The IGS-10080MFT provides advanced Layer 2 to Layer 4 data switching and redundancy, Quality of Service traffic control, network access control and authentication, and Secure Management features to protect customer’s industrial and automation network connectivity.


Fast Recovery to a Redundant Ethernet Network

The IGS-10080MFT features strong and self-recovery capability to prevent interruptions and outside intrusions. It incorporates Rapid Spanning Protocol (RSTP), Multiple Spanning Tree (MSTP) as well as the Loop protection function that will shutdown specific Ethernet interfaces when system detects a loop. The dynamic port Link Aggregation and Redundant Power System are provided into customers’ industrial automation network to enhance system reliability and uptime in the harsh factory environments. It greatly protects customer’s industrial network with switching recovery capability that is used for implementing fault tolerant ring architectures.


Modbus TCP Provides Flexible Network Connectivity for Factory Automation

With the supported Modbus TCP/IP protocol, the IGS-10080MFT can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information, communication status, and DI and DO status, thus easily achieving enhanced monitoring and maintenance of the entire factory.


Flexible and Extendable Solution

The IGS-10080MFT’s 8 built-in mini-GBIC slots support triple-speed 100/1000/2500BASE-X SFP (small form-factor pluggable) fiber-optic modules on port 3 and port 4, while ports 5 to 10 support dual-speed 100/1000BASE-X SFP (small form-factor pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.


1588 Precision Time Protocol for Industrial Computing Networks

The IGS-10080MFT is intended for telecom and carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for the IEEE 1588 Precision Time Protocol and synchronous Ethernet. The protocol can precisely synchronize multiple clocks on a network.




At-a-glance


  • 12 to 48V DC, redundant power with polarity reverse protect function

  • 2 10/100/1000BASE-T Ethernet ports (Port 1 to port 2)

  • 2 100/1000/2500BASE-X mini-GBIC SFP ports (Port 3 to port 4)

  • 6 100/1000BASE-X mini-GBIC SFP ports (Port 5 to port 10)

  • 8 priority queues on all switch ports

  • 802.3ad Link Aggregation Control Protocol (LACP)

  • AC 24V power adapter acceptable

  • Cisco ether-channel (Static Trunk)

  • DIN-Rail and Wall Mount Design

  • DSCP remarking

  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth

  • IEEE 1588v2 PTP (Precision Time Protocol)

  • IEEE 802.1p CoS

  • IEEE 802.1Q tagged VLAN

  • Industrial Case / Installation

  • Industrial Protocol

  • Ingress Shaper and Egress Rate Limit per port bandwidth control

  • IP TCP/UDP port number

  • IP TOS/DSCP/IP Precedence

  • IP30 Aluminum case protection

  • Layer 2 Features

  • MAC-based VLAN

  • Maximum 5 trunk groups, up to 10 ports per trunk group

  • Minus 40 to 75 Degree C operation temperature

  • Modbus TCP for real-time monitoring in SCADA system

  • Multicast/Unknown-Unicast

  • Physical Port

  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port

  • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)

  • Private VLAN

  • Protocol-based VLAN

  • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

  • Provides Port Mirror (many-to-1)

  • Quality of Service

  • Redundant Power Design

  • Storm Control support

  • STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard

  • Strict priority and Weighted Round Robin (WRR) CoS policies

  • Supports 6000 VDC Ethernet ESD protection

  • Supports E.R.P.S. (Ethernet Ring Protection Switching)

  • Supports EFT protection 6000 VDC for power line

  • Supports Link Aggregation

  • Supports QoS and In/Out bandwidth control on each port

  • Supports Spanning Tree Protocol

  • Supports VLAN

  • Traffic classification

  • Traffic-policing policies on the switch port

  • Typical network application

  • Up to 255 VLANs groups, out of 4095 VLAN IDs

  • Up to 26Gbps bandwidth(Duplex Mode)

  • Voice VLAN




Reasons to buy

  • 12 to 48V DC, redundant power with polarity reverse protect function
  • 2 10/100/1000BASE-T Ethernet ports (Port 1 to port 2)
  • 2 100/1000/2500BASE-X mini-GBIC SFP ports (Port 3 to port 4)
  • 6 100/1000BASE-X mini-GBIC SFP ports (Port 5 to port 10)
  • 8 priority queues on all switch ports
  • 802.3ad Link Aggregation Control Protocol (LACP)
  • AC 24V power adapter acceptable
  • Cisco ether-channel (Static Trunk)
  • DIN-Rail and Wall Mount Design
  • DSCP remarking
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • IEEE 1588v2 PTP (Precision Time Protocol)
  • IEEE 802.1p CoS
  • IEEE 802.1Q tagged VLAN
  • Industrial Case / Installation
  • Industrial Protocol
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • IP TCP/UDP port number
  • IP TOS/DSCP/IP Precedence
  • IP30 Aluminum case protection
  • Layer 2 Features
  • MAC-based VLAN
  • Maximum 5 trunk groups, up to 10 ports per trunk group
  • Minus 40 to 75 Degree C operation temperature
  • Modbus TCP for real-time monitoring in SCADA system
  • Multicast/Unknown-Unicast
  • Physical Port
  • Port Mirroring to monitor the incoming or outgoing traffic on a particular port
  • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
  • Private VLAN
  • Protocol-based VLAN
  • Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  • Provides Port Mirror (many-to-1)
  • Quality of Service
  • Redundant Power Design
  • Storm Control support
  • STP, IEEE 802.1D Spanning Tree Protocol- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN- BPDU Guard
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports 6000 VDC Ethernet ESD protection
  • Supports E.R.P.S. (Ethernet Ring Protection Switching)
  • Supports EFT protection 6000 VDC for power line
  • Supports Link Aggregation
  • Supports QoS and In/Out bandwidth control on each port
  • Supports Spanning Tree Protocol
  • Supports VLAN
  • Traffic classification
  • Traffic-policing policies on the switch port
  • Typical network application
  • Up to 255 VLANs groups, out of 4095 VLAN IDs
  • Up to 26Gbps bandwidth(Duplex Mode)
  • Voice VLAN

Specification

Technical Description: PLANET IGS-10080MFT network switch Managed Gigabit Ethernet (10/100/1000) Blue, White
Certificates
Certification:
FCC, CE

Certification
Certification:
FCC, CE

Data transmission
Jumbo frames:
9000
Jumbo frames support:
Yes
Number of queues:
8
Store-and-forward:
Yes
Throughput:Rate at which data can be transferred.
19.3 Mpps
Switching capacity:The data transfer capacity of the switch per second.
26 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
8000 entries

Design
DIN rail mounting:
Yes
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP30
Wall mountable:The product can be mounted on (attached to ) a wall.
Yes
LED indicators:
Yes
Reset button:
Yes
Housing material:
Aluminium
Product colour:
Blue, White
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
No

Logistics data
Harmonized System (HS) code:
85176990

Management features
System event log:
Yes
ARP inspection:
Yes
Traffic classification:
Yes
Web-based management:Using a website/web application to manage something.
Yes
Quality of Service (QoS) support:
Yes
Switch type:What switch device has, managed or unmanaged.
Managed

Multicast features
Multicast support:
Yes

Network
Number of VLANs:
4095
Virtual LAN features:
Private VLAN, Tagged VLAN, Protocol-based VLAN
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
Link aggregation:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Port mirroring:
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 1588v2, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Networking
Number of VLANs:
4095
Virtual LAN features:
Private VLAN, Tagged VLAN, Protocol-based VLAN
VLAN support:A Virtual Local Area Network (VLAN) consists of a group of computers and switches that can be physically distributed over different networks and buildings, but form one LAN on a logical level.
Yes
Auto-negotiation:
Yes
Flow control support:
Yes
Link aggregation:
Yes
MAC address auto-aging supported:
Yes
MAC address auto-learning supported:
Yes
Rate limiting:
Yes
Spanning tree protocol:
Yes
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Yes
Half duplex:
Yes
Port mirroring:
Yes
Copper ethernet cabling technology:
10BASE-T, 100BASE-TX, 1000BASE-T
10G support:The product can use Oracle 10G, which is a database management system introduced in 2003.
No
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 1588v2, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z

Operational conditions
Heat dissipation:The heat generated by the power supply.
47.76 BTU/h
Storage relative humidity (H-H):
5 - 95%
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 75 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 75 °C

Optical fiber
Fiber ethernet cabling technology:
100BASE-FX, 1000BASE-LX, 1000BASE-SX

Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
MiniGBIC
SFP module slots quantity:
8
Gigabit Ethernet (copper) ports quantity:
2
Basic switching RJ-45 Ethernet ports type:The type/category of basic switching RJ-45 Ethernet ports (sockets).
Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
2

Power
Power consumption (max):The maximum amount of power used by the device.
13.92 W
DC input voltage:
12 - 48 V
Redundant power supply (RPS) support:Additional power supply which can run a computer if the main power supply fails.
Yes

Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
No

Protocols
Supported network protocols:Network protocols tested as compatible with this product e.g. FTP,HTML, POP.
IPv4 / IPv6
Management protocols:
web, telnet, SNMP

Security
Authentication:
Port-based authentication
BPDU filtering/protection:
Yes
Loop protection:
Yes
Security algorithms:Security algorithms are used to provide authentication, cipher key generation, integrity and radio link privacy to users on mobile networks. The security algorithms supported are the ones that can be used with this product.
802.1x RADIUS, SSH, SSL/TLS
SSH/SSL support:
Yes
IGMP snooping:
Yes
Access Control List (ACL):
Yes

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
1.04 kg
Height:The measurement of the product from head to foot or from base to top.
152 mm
Depth:The distance from the front to the back of something.
107.3 mm
Width:The measurement or extent of something from side to side.
76.8 mm

Product details

IGS-10080MFT Planet

PLANET IGS-10080MFT network switch Managed Gigabit Ethernet (10/100/1000) Blue, White

£155.99 and In stock

SKU: IGS-10080MFT