Certificates
Certification:
FCC Class A, CE Class A
Certification
Certification:
FCC Class A, CE Class A
Features
Internal:The product is built in.
Logistics data
Harmonized System (HS) code:
85176990
Network
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Converter output interface:
100Base-FX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
100BASE-FX, 100Base-TX, 10Base-T
Maximum data transfer rate:
100 Mbit/s
Networking
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Converter output interface:
100Base-FX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
100BASE-FX, 100Base-TX, 10Base-T
Maximum data transfer rate:
100 Mbit/s
Operational conditions
Storage relative humidity (H-H):
5 - 90%
Operating relative humidity (H-H):
5 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C
Performance
Sensitivity:A measure of the device's response to slight changes or signals.
-31.8 dBmW
Tx power (min):
-23.5 dBmW
Fiber cable diameters supported (core/cladding):
9/125,50/125,62.5/125 µm
Fiber mode structure:
Multi-mode, Single-mode
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
2000 m
Ports & interfaces
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SC
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Input voltage:The voltage (V) which is required to power the product.
5 V
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
200 g
Height:The measurement of the product from head to foot or from base to top.
26 mm
Depth:The distance from the front to the back of something.
70 mm
Width:The measurement or extent of something from side to side.
94 mm
