AddOn Networks EX-SFP-10GE-ER-1410-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1410 nm

Quick Code: Q810794 MPN: EX-SFP-10GE-ER-1410-AO
£1733.99

Out of Stock

Overview


This Juniper Networks® EX-SFP-10GE-ER-1410 compatible SFP+ transceiver provides 10GBase-CWDM throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1410nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Juniper Networks® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Juniper Networks®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.




Specification

Technical Description: AddOn Networks EX-SFP-10GE-ER-1410-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1410 nm
Certificates
Certification:
TAA

Certification
Certification:
TAA

Features
Brand compatibility:What other brands this brand can be used with.
Juniper
Hot-swap:
Yes
Product colour:
Silver

General
Type:Characteristics of the device.
Network Transceiver Modules

Operational conditions
Maximum operating temperature:
70 °C
Minimum operating temperature:
0 °C

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Packaging data
Package weight:Weight of the packaged product.
181 g
Package height:The distance from the top to the bottom of the packaging.
30.5 mm
Package depth:The distance from the front to the back of the packaging.
120.7 mm
Package width:The distance from one side of the packaging to the other.
70 mm

Performance
Fiber ethernet cabling technology:
10GBASE
Coarse Wavelength Division Multiplexing (CWDM):
Yes
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1410 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
40000 m
SFP transceiver standard:
CWDM
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Single-mode fiber (SMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Product details

EX-SFP-10GE-ER-1410-AO Addon

AddOn Networks EX-SFP-10GE-ER-1410-AO network transceiver module Fiber optic 10000 Mbit/s SFP+ 1410 nm

£1733.99 and

SKU: EX-SFP-10GE-ER-1410-AO