AddOn Networks 1000BASE-SX SFP network transceiver module Fiber optic 1000 Mbit/s

Quick Code: Q574934 MPN: E1MG-SX-OM-AO
£50.99

Out of Stock

Overview


Add-On's Small Form Factor Pluggable (SFP) transceivers are designed to exceed OEM system requirements. All products are guaranteed 100% compatible and will not void OEM Service'support programs. Our SFP Transceivers utilize industry standard bi-directional serial optical data communication protocols such as Gigabit Ethernet or Fiber Channel reaching speeds up to 8Gbps.

All our SFP Transceivers are compliant with the Multi-Source Agreement (MSA) ensuring compatibility with a wide range of networking equipment. Select your choice or Copper or Fiber versions that support Fast Ethernet and Gigabit Ethernet speeds

- 100% OEM Compatible
- 100% Tested
- Conforms to IEEE 802.3z standard
- Class 1 Laser Product Compliant with the Requirements of IEC 60825-1 and IEC 60825-2
- Compliant with Multi-Source Agreement (MSA)
- RoHS Compliant




Specification

Technical Description: AddOn Networks 1000BASE-SX SFP network transceiver module Fiber optic 1000 Mbit/s
Certificates
Certification:
MSA
Compliance certificates:
RoHS

Certification
Certification:
MSA
Compliance certificates:
RoHS

Features
Hot-Plug support:Device has hot-plug capability, which means that user can replace system components without shutting down the system.
Yes

General
Type:Characteristics of the device.
Network Transceiver Modules

Operational conditions
Storage relative humidity (H-H):
10 - 85%
Operating relative humidity (H-H):
10 - 80%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 85 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 70 °C

Performance
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Yes
Cabling technology:Type of cable technology performance.
1000BASE-SX
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3z
SFP transceiver standard:
SX
Fiber cable diameters supported (core/cladding):
50/125,62.5/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Interface type:
SFP
Maximum data transfer rate:
1000 Mbit/s
SFP transceiver type:
Fiber optic

Power
Input voltage:The voltage (V) which is required to power the product.
3.3 V

Weight & dimensions
Height:The measurement of the product from head to foot or from base to top.
8.5 mm
Depth:The distance from the front to the back of something.
56.5 mm
Width:The measurement or extent of something from side to side.
13.4 mm

Product details

E1MG-SX-OM-AO Addon

AddOn Networks 1000BASE-SX SFP network transceiver module Fiber optic 1000 Mbit/s

£50.99 and

SKU: E1MG-SX-OM-AO