DrayTek ANT-4GE1-K network antenna Omni-directional antenna N-type 6 dBi

Quick Code: Q137463 MPN: ANT-4GE1-K
£52.00

Add to basket
In Stock

Key Features

  • Omnidirectional Outdoor Aerial
  • 4-6 dBi Signal Gain
  • Can also be used Indoors
  • Improves signal stability and reception
  • Suitable for all DrayTek LTE routers
  • Wall or Pole mountable (includes fittings)
  • 4G, 3G, 2G & LTE Compatible (See band support)
  • N-Plug Connector
  • Requires N-to-SMA cable (sold separately)

Overview


Outdoor 4G Antenna for DrayTek LTE Routers
4G/LTE routers such as the DrayTek Vigor 2862Lac can provide highly resilient connectivity by utilising mobile broadband, either as the main Internet connection or as a backup connection for the building.

The Outdoor 4G Antennas for DrayTek LTE Routers can improve 4G, 3G & LTE signal reception for any DrayTek Vigor LTE router, expanding coverage and improving speeds, by allowing you to locate the antenna in a location which receives a strong signal.

Installation of outdoor antennas enables or improves 4G/LTE connectivity into locations where it’s typically inaccessible. For instance, in a comms cabinet, or in parts of a building that otherwise cannot receive mobile signal, due to building layout or location. Simply placing the antennas physically outdoors normally provides a significant signal boost over what can be achieved within a building, potentially improving speeds through better access to LTE bands and nearby mobile cell towers. The antennae can also be installed inside a building, perhaps just run outside the location/room which has poor coverage.

The Outdoor 4G Antennas for DrayTek LTE Routers support all currently used 4G, 3G and 2G frequency bands from 700MHz to 2.7GHz.

The antennas are Omni-Directional, designed for vertical orientation to receive signal from any nearby mobile cell tower, without requiring careful or sensitive aiming during installation.



Install a pair of Outdoor 4G Antennas around 0.5m to 1m apart to enable the MIMO (Multiple In, Multiple Out) capability of 4G & LTE wireless networks, further improving speeds and connection resilience. For best results, separate the antennas horizontally in built-up areas and vertically in open areas.

The Outdoor 4G Antennas for DrayTek LTE Routers are weatherproof and ideal for permanent outdoor installation either on a pole or wall. Fixings are provided suitable for either (poles not included).

The N-type connector on each antenna provides a secure and weather resistant antenna connection, which links to the router’s SMA antenna connectors with a suitable cable. Each Outdoor 4G Antenna requires an N-plug to SMA cable for installation, such as our own 5 metre cable (model: CAB-LTEA5, supplied separately). You can use your own shorter or longer cables instead, ensuring the right connectors and always keep cable lengths to a minimum to avoid unncessary signal loss.




At-a-glance


  • 4-6 dBi Signal Gain

  • 4G, 3G, 2G & LTE Compatible (See band support)

  • Can also be used Indoors

  • Improves signal stability and reception

  • N-Plug Connector

  • Omnidirectional Outdoor Aerial

  • Requires N-to-SMA cable (sold separately)

  • Suitable for all DrayTek LTE routers

  • Wall or Pole mountable (includes fittings)




Reasons to buy

  • 4-6 dBi Signal Gain
  • 4G, 3G, 2G & LTE Compatible (See band support)
  • Can also be used Indoors
  • Improves signal stability and reception
  • N-Plug Connector
  • Omnidirectional Outdoor Aerial
  • Requires N-to-SMA cable (sold separately)
  • Suitable for all DrayTek LTE routers
  • Wall or Pole mountable (includes fittings)

Specification

Technical Description: DrayTek ANT-4GE1-K network antenna Omni-directional antenna N-type 6 dBi
Features
Housing material:
Acrylonitrile butadiene styrene (ABS), Zinc
Product colour:
Stainless steel, White
Voltage Standing Wave Ratio (VSWR):
1.5
Polarization:
Vertical polarization
Antenna connector type:The way in which the antenna is connected to the device e.g. coaxial.
N-type
Connector gender:
Female
Antenna type:Type of antenna, also known an aerial, e.g. external, internal.
Omni-directional antenna

General
Type:Characteristics of the device.
Network Antennas

Logistics data
Harmonized System (HS) code:
85177100

Operational conditions
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-40 - 80 °C

Packaging content
Quantity per pack:The amount in each pack.
1 pc(s)

Performance
Horizontal beam width:
360°
Vertical beam width:
25°
Bandwidth note:
800, 1800, 2600, 900, 2100, 700, 3400 MHz
Impedance:The effective resistance of an electric circuit or component to alternating current, arising from the combined effects of ohmic resistance and reactance.
50 O
Gain:
4 / 6 dBi
Frequency band:A small section of the spectrum of radio communication frequencies, in which channels are usually used or set aside for the same purpose e.g.for a channel on FM radio; for mobile networks to communicate with mobile phones.
0 GHz
Antenna gain level (max):Antenna gain is the measurement of an antenna's ability to amplify the incoming microwave signals in a particular direction, compared with the sensitivity of an isotropic antenna in any direction, or a dipole antenna in the equatorial direction.
6 dBi

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
500 g
Diameter:Distance from one side of a body (circle or sphere) to the other side, measured by a straight line passing through the centre of the body.
7 mm
Height:The measurement of the product from head to foot or from base to top.
32 mm

Product details

ANT-4GE1-K Draytek

DrayTek ANT-4GE1-K network antenna Omni-directional antenna N-type 6 dBi

£52.00 and In stock

SKU: ANT-4GE1-K