Intellinet Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit Extends PoE up to 1000 m (3280 ft.), One PD Port up to 95 W, IEEE 802.3bt (4PPoE) Compatible, IP67 Waterproof and Dustproof, Set of Two Modules, Plastic, Gray

Quick Code: Q1279197 MPN: 561952
£139.00

Add to basket
In Stock

Key Features

  • IP67-rated, dustproof and waterproof
  • Supports 10/100 Mbps data rates
  • Fully NDAA-compliant

Overview


Ultra Long Distance Power over Ethernet Extension / Repeater / Amplifier for a PoE range up to 1,000 m (3,280 ft.) - even in harsh outdoor conditions
The Intellinet Network Solutions Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit adds up to 1,000 m (3,280 ft.) to the connection distance from a PoE source to an output device via Cat5e or Cat6 cable. It has an output power rating up to 30 watts, which is enough for many power-hungry PoE devices. Its high range and weatherproof housing is especially useful for outdoor IP surveillance camera deployments. This PoE repeater delivers up to 30 W at 100 Mbps over 300 m (984 ft.) or up to 15.4 W at 10 Mbps over 800 m (2625 ft.).

Designed for Outdoor Use
This PoE+ extender offers the right power and data connector for longer-distance applications and suits a wide variety of environments. Its weatherproof IP67 (waterproof and dustproof) rating and a wide operating temperature range of -10 - 55°C (14 - 131°F) make it able to withstand harsh outdoor conditions.

Power over Ethernet 802.3bt-compliant Input, 802.3at/af-compliant Output
Supporting the IEEE 802.3bt protocol with input power up to 95 W, this PoE+ Extender Kit provides up to 30 watts to a connected 802.3at-compliant device or 15 W to an 802.3af-compliant device, along with data up to Fast Ethernet speeds.

Reduced Wiring Costs
This PoE+ Extender helps avoid the expense of running AC power lines to a wireless access point, network camera or IP phone. Simply connect the extender to the LAN switch port through existing Cat5e/6/6a cables to deliver DC power as well as transfer data.

Safe Protection for your Expensive Network Equipment
The auto-sensing technology of this high-power PoE extender ensures that your products are protected from power problems like short circuits (short GND), current overloads and high voltages.

Simple Installation with Cascading Power
This PoE Extender was designed to be as easy as possible to set up and use. All it takes to have it up and running is to connect its PoE In port to your PoE injector or PoE switch and to connect the PoE Out port to the PoE device you want to connect (e.g., a VoIP phone or a PoE network camera). The kit includes two modules that always need to be used together for maximum distance capabilities.




At-a-glance


  • Compatible with IEEE 802.3bt/at/af-compliant PoE injectors and PoE switches (PSE)

  • Compatible with IEEE 802.3bt/at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more

  • Delivers data up to 1000 m (3280 ft.) without packet loss

  • Extremely high PoE range and weatherproof housing ideal for IP camera installations

  • Fully NDAA-compliant

  • IP67-rated, dustproof and waterproof

  • Kit includes two modules for maximum distance capabilities

  • Plug-and-play installation; no configuration required

  • Requires no additional power supply; draws power directly from the PoE input

  • Short-circuit, overload and high-voltage protection

  • Supports 10/100 Mbps data rates




Reasons to buy

  • Compatible with IEEE 802.3bt/at/af-compliant PoE injectors and PoE switches (PSE)
  • Compatible with IEEE 802.3bt/at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more
  • Delivers data up to 1000 m (3280 ft.) without packet loss
  • Extremely high PoE range and weatherproof housing ideal for IP camera installations
  • Fully NDAA-compliant
  • IP67-rated, dustproof and waterproof
  • Kit includes two modules for maximum distance capabilities
  • Plug-and-play installation; no configuration required
  • Requires no additional power supply; draws power directly from the PoE input
  • Short-circuit, overload and high-voltage protection
  • Supports 10/100 Mbps data rates

Specification

Technical Description: Intellinet Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit Extends PoE up to 1000 m (3280 ft.), One PD Port up to 95 W, IEEE 802.3bt (4PPoE) Compatible, IP67 Waterproof and Dustproof, Set of Two Modules, Plastic, Gray
Certificates
Compliance certificates:
National Defense Authorization Act (NDAA), CE, Federal Communications Commission (FCC), RoHS, UKCA

Certification
Compliance certificates:
National Defense Authorization Act (NDAA), CE, Federal Communications Commission (FCC), RoHS, UKCA

Features
International Protection (IP) code:The IP code classifies and rates the degree of protection provided against the intrusion (including body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures. It is published by the International Electrotechnical Commission (IEC). The digits (characteristic numerals) indicate conformity with the conditions summarized in the tables below. Where there is no protection rating with regard to one of the criteria, the digit is replaced with the letter X. an electrical socket rated IP22 is protected against insertion of fingers and will not be damaged or become unsafe during a specified test in which it is exposed to vertically or nearly vertically dripping water. Another example is the Sony Xperia Z Ultra, one of the first cellular phones to be IP-rated; it is rated at IP58 and marketed as "dust resistant" and can be "immersed in 1.5 meter of freshwater for up to 30 minutes".
IP67
Power protection features:Features that protect the device against power problems e.g. overload.
Over voltage, Overload, Short circuit
LED indicators:
Yes
Maximum operating distance:The maximum distance from which you can operate the device.
1000 m
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Product colour:
White

Network
Cable types supported:
Cat3, Cat4, Cat5, Cat5e, Cat6, Cat6a
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Cabling technology:Type of cable technology performance.
10/100
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet

Networking
Cable types supported:
Cat3, Cat4, Cat5, Cat5e, Cat6, Cat6a
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt, IEEE 802.3u, IEEE 802.3x
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Yes
Cabling technology:Type of cable technology performance.
10/100
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet

Operational conditions
Storage relative humidity (H-H):
5 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-40 - 70 °C
Operating relative humidity (H-H):
10 - 90%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
-10 - 55 °C

Packaging content
Manual:
Yes
Number of products included:The number of products that are included in the package.
1 pc(s)

Packaging data
Package type:The type of product package e.g. box.
Box

Ports & interfaces
RJ-45 output ports:
1
RJ-45 input ports:
1

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
0.4 W
Power consumption (max):The maximum amount of power used by the device.
0.7 W
Output power:The power that the device can produce.
30 W

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
155 g
Height:The measurement of the product from head to foot or from base to top.
29 mm
Depth:The distance from the front to the back of something.
157 mm
Width:The measurement or extent of something from side to side.
29 mm

Product details

561952 Intellinet

Intellinet Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit Extends PoE up to 1000 m (3280 ft.), One PD Port up to 95 W, IEEE 802.3bt (4PPoE) Compatible, IP67 Waterproof and Dustproof, Set of Two Modules, Plastic, Gray

£139.00 and In stock

SKU: 561952