Data transmission
Packet buffer memory:
0.032 MB
Maximum data transfer rate:
1 Gbit/s
Switching capacity:The data transfer capacity of the switch per second.
16 Gbit/s
MAC address table:The MAC address is the 'Media Access Control Address'. It is a unique address given to a network interface controller (NIC) in a device. A MAC address table shows the addresses in a table format.
8000 entries
Design
Safety:List of regulatory safety standards for all countries in which this product has been certified.
UL (UL 1950), CUL, C-Tick
Rack mounting:The type of mounting that can position devices in a shelving system (rack).
General
Type:Characteristics of the device.
Network Switches
Logistics data
Harmonized System (HS) code:
85176990
Management features
Switch type:What switch device has, managed or unmanaged.
Unmanaged
Network
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Copper ethernet cabling technology:
1000BASE-T, 100BASE-TX, 10BASE-T
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Networking
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Copper ethernet cabling technology:
1000BASE-T, 100BASE-TX, 10BASE-T
Networking standards:The way in which the network is working, e.g. IEEE 802.11a, IEEE 802.11b, IEEE 802.11g.
IEEE 802.3ab, IEEE 802.3i, IEEE 802.3u
Operational conditions
Operating relative humidity (H-H):
10 - 90%
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Other features
Acoustic pressure emissions:Level of sound pressure per ISO 9614-1.
0 dB
Electromagnetic emissions:
CE mark, commercial FCC Part 15 Class A, EN 55 022 (CISPR 22), Class A VCCI, Class A C-Tick
I/O ports:An interface on a device to which you can connect another device.
8 auto speed(10/100/1000) sensing UTP RJ-45
Power requirements:
5 V @ 2.8 A DC
Dimensions (WxDxH):Dimensions of the product (Width x Depth x Height).
235.5 x 100.8 x 27 mm
Data transfer rate:Rate at which data can be transferred, usually measured in units per second. May vary with network configurations.
1000 Mbit/s
Latency:Latency is the time needed to forward a packet of data.
(100 to 100 Mbps): 40 µ (max), (1000 to 1000 Mbps): 10 µ (max)
Performance
Minimum system requirements:
- UTP Category 5 or better cables
-Network card for each PC or server (e.g. GA302T)
-Network software
Compatible operating systems:List of desktop operating systems tested as compatible with this product.
Windows, Linux, Mac OS
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity:The number of basic switching RJ-45 Ethernet ports (sockets).
8
Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
14 W
Power over Ethernet (PoE)
Power over Ethernet (PoE):The device supports Power over Ethernet (PoE), which is one of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as wireless access points or IP cameras.
Protocols
Data link protocols:
Ethernet,Fast Ethernet, Gigabit Ethernet
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
760 g
