Lindy 70m Cat.6 4x4 HDMI 4K60 Matrix Extender

Quick Code: Q707434 MPN: 38328
£700.00

Out of Stock

Overview


The Lindy 70m Cat.6 4x4 HDMI 4K60 Matrix Extender is a high-performance, professional solution for distribution of 4K HDMI signals to multiple displays using standard Cat.6 network cables from 4 separate HDMI sources.

Professional HDMI Content DistributionThis 4x4 matrix allows for the distribution of HDMI content to 4 separate locations, using the included receivers, at up to 70m in distance, perfect for splitting or switching content to various displays in sports bars, events or residential home cinemas. Each Cat.6 extension output also has a simultaneous HDMI output for local monitoring for each zone, or for a larger install with closely located displays. Each port also support simple independent downscaling to 1920x1080, for consistently ensuring peak performance on a variety of displays. Professional EDID management ensures maximum compatibility with both the source devices and displays.The following distance and resolution combinations are supported:- 70m with Cat.6 cable: 1920x1080@60Hz 4:4:4 8bit, 3D@1920x1080- 40m with Cat.6A cable: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit

Eye-Catching 4K and HDR SupportWith support for resolutions up to 3840x2160@60Hz, this matrix provides exceptional clarity of high-quality video, including movies, sports, games, or live monitoring. HDR support ensures a much wider colour gamut is supported, alongside higher peak brightnesses and deeper blacks for an enhanced dynamic contrast. This provides an engaging visual experience for the viewer in a variety of different applications including home cinema installations, larger distribution in educational buildings or commercial advertising and displays.

Flexible ControlThe included IR cables allow for simple control via an IR remote from any of the receiver locations, removing the need to be situated at the source side on the setup, while push buttons on the main unit provide easy control at the transmitter side. RS-232 and Ethernet connections also provide the ability for integration into larger control systems. An in-built Web-Gui also ensures very simple management using a connected PC.

Simultaneous PoC DistributionThe Cat.6 HDMI 18G Matrix also supports PoC (Power over cable) allowing for power to be distributed alongside audio and video over the cat.6 cabling. This allows for only one power source being required at the transmitter side, ensuring a minimalist and time-saving setup at the receiver locations.

Please Note: The quoted resolutions are possible with a direct connection between transmitter and receiver using good quality Cat.6 solid core cable. Using a different cable type, introducing wall plates, couplers or patch panels will result in a reduction of maximum distances.




At-a-glance


  • 2-year warranty

  • Distribute 4K HDMI signals to up to 4 displays in multiple locations from 4 different sources.

  • Features 4 HDMI outputs on the transmitter for local monitoring, which run simultaneously with the extension output.

  • Supports Power over Cable (PoC) to the receivers, only a single power supply is required for operation.

  • Supports resolutions up to 4K@60Hz, with additional support for HDR.




Reasons to buy

  • 2-year warranty
  • Distribute 4K HDMI signals to up to 4 displays in multiple locations from 4 different sources.
  • Features 4 HDMI outputs on the transmitter for local monitoring, which run simultaneously with the extension output.
  • Supports Power over Cable (PoC) to the receivers, only a single power supply is required for operation.
  • Supports resolutions up to 4K@60Hz, with additional support for HDR.

Specification

Technical Description: Lindy 70m Cat.6 4x4 HDMI 4K60 Matrix Extender
Features
Product colour:
Black
Bandwidth:Bandwidth is the difference between the upper and lower frequencies in a continuous set of frequencies. It is typically measured in Hertz (Hz). A key characteristic of bandwidth is that any band of a given width can carry the same amount of information, regardless of where that band is located in the frequency spectrum. For example, a 3 kHz band can carry a telephone conversation whether that band is at baseband (as in a POTS telephone line) or modulated to some higher frequency.
18 Gbit/s
Consumer Electronics Control (CEC) support:
Yes
HDCP:High-bandwidth Digital Content Protection (HDCP) is a form of digital copy protection to prevent copying of digital audio and video content as it travels across connections.
Yes
HDCP version:
2.2
Infrared (IR) frequency range:
20 - 60 kHz
Extended display identification data (EDID):
Yes
Maximum refresh rate:
60 Hz
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
70 m
Cable types supported:
Cat6
Maximum resolution:The maximum number of pixels that can be displayed in the image. It is usually quoted as width × height,: for example, "1024 × 768" means the width is 1024 pixels and the height is 768 pixels.
3840 x 2160 pixels
Type:Characteristics of the device.
AV transmitter & receiver

Operational conditions
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Storage relative humidity (H-H):
20 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C

Packaging content
Manual:
Yes
Cables included:
RS-232

Ports & interfaces
HDMI version:
2.0
Connectivity technology:
Wired

Power
Input current:
2.5 A
Operating voltage:Defines the range of operating voltages available
12 V

Weight & dimensions
Transmitter weight:
950 g
Transmitter dimensions (WxDxH):
320 x 100 x 36 mm
Receiver weight:
140 g
Receiver dimensions (WxDxH):
61 x 88 x 18 mm

Product details

38328 Lindy

Lindy 70m Cat.6 4x4 HDMI 4K60 Matrix Extender

£700.00 and

SKU: 38328