Certificates
Compliance certificates:
RoHS
Certification
Compliance certificates:
RoHS
Features
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Internal:The product is built in.
General
Type:Characteristics of the device.
Network Media Converters
Logistics data
Harmonized System (HS) code:
85176990
Network
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet
Converter output interface:
100Base-FX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
10Base-T
Maximum data transfer rate:
200 Mbit/s
Networking
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
10,100 Mbit/s
Ethernet interface type:
Fast Ethernet
Converter output interface:
100Base-FX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
10Base-T
Maximum data transfer rate:
200 Mbit/s
Operational conditions
Operating relative humidity (H-H):
10 - 90%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-10 - 70 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 60 °C
Other features
Dimensions (WxDxH):Dimensions of the product (Width x Depth x Height).
95 x 160 x 20 mm
Full duplex:A full-duplex system allows communication in both directions, and unlike half-duplex, allows this to happen simultaneously.
Packaging content
Packaging data
Package weight:Weight of the packaged product.
766 g
Package height:The distance from the top to the bottom of the packaging.
89 mm
Package depth:The distance from the front to the back of the packaging.
137 mm
Package width:The distance from one side of the packaging to the other.
206 mm
Performance
Fiber mode structure:
Single-mode
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
30000 m
Ports & interfaces
DC-in jack:The socket/plug where the DC electricity supply connects to the device.
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SC
Fiber ports quantity:The number of sockets (ports) for fibers (cables).
1
Ethernet LAN (RJ-45) ports:Number of Ethernet LAN (RJ-45) ports (connecting interfaces) in the device. Ethernet LAN (RJ-45) ports allow a computer to connect to the ethernet.
1
Connectivity technology:
Wired
Power
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
600 g
